Bend Weight & Length
The Bend Weight & Length calculator allows you to determine the approximate weight of your bend based on specific product dimensions.
| Nominal Pipe Size (A) (SEE MATERIAL CHART) |
|
| Outside Diameter (Inches) (B) | |
| Wall Thickness (Inches) (C) | |
| Center Line Radius (Inches)(D) | |
| Bend Angle (DEGREES) (E) | |
| Lead Tangent Length (Inches) (F) | |
| Lag Tangent Length (Inches) (G) |
| Volume of Steel (Cubic Inches) | |
| Weight of Bend (lbs) | |
| Bend Material Length (inches) |
Standard Material Chart
The Standard Material Chart provides the list of the most readily available material offerings stocked by Silvery Steel.
| NPS (A) | OD | Wall Thickness | Wt/Ft |
|---|---|---|---|
| 2.5 NPS | 2.875 | 0.276 | 7.66 |
| 3 NPS | 3.5 | 0.300 | 10.25 |
| 4 NPS | 4.5 | 0.230 | 11.35 |
| 4 NPS | 4.5 | 0.337 | 14.98 |
| 5 NPS | 5.563 | 0.258 | 14.62 |
| 5 NPS | 5.563 | 0.375 | 20.78 |
| 6 NPS | 6.625 | 0.280 | 18.97 |
| 6 NPS | 6.625 | 0.432 | 28.57 |
| 8 NPS | 8.625 | 0.322 | 28.55 |
| 8 NPS | 8.625 | 0.500 | 43.39 |
| 10 NPS | 10.75 | 0.365 | 40.48 |
| 10 NPS | 10.75 | 0.500 | 54.74 |
| 12 NPS | 12.75 | 0.375 | 49.56 |
| 12 NPS | 12.75 | 0.500 | 65.42 |
| 14 NPS | 14 | 0.375 | 54.57 |
| 14 NPS | 14 | 0.500 | 72.09 |
| 16 NPS | 16 | 0.375 | 62.58 |
| 16 NPS | 16 | 0.500 | 82.77 |
| 18 NPS | 18 | 0.500 | 95.64 |
| 20 NPS | 20 | 0.500 | 106.57 |