-
-
Email
Stainless Steel Forged Fittings Manufacturer in India
Leading Supplier of SS BSP Elbow, View Dimensions of Stainless Steel Npt Fittings
Stainless steel forged fittings are made from carbon steel, which is forged. This carbon steel is heated at extreme temperatures and later placed in dies. This steel is then cut into forged steel fittings. The SS BSP Elbow are threaded fittings, which are extremely resistant to corrosion and extreme temperatures. These elbows are high-strength and produce a good seal in piping systems avoiding any chances of leaks. Most forged steel fittings have fatigue strength of 37% or higher. We are one of the top Stainless Steel Forged Fittings manufacturers in India who focuses on creating high-quality products at the most reasonable prices.
Stainless Steel Forged Fittings
SS BSP Elbow
Stainless Steel Npt Fittings
Check Price List of 1 inch stainless steel coupling & ASTM A182 SS Union/ Tee
Stainless Steel Npt Fittings are the most popular pressure calibration systems in use. These fittings are available in brass and iron for low-pressure applications. Carbon is used in high-pressure situations. These stainless steel npt fittings depends on a metal-to-metal sealing design. Here the threads in the connectors form together. These connections are advised where there are no changes required in the piping systems. The ASME B16.11 stainless BSP fittings use rounded threads with an angle of 55 degrees. These fittings have been accepted internationally for fitting and sealing plumbing pipes and fittings.
The ASTM A182 SS Union is a type of fitting equipment, which unites two pipes and can be detached without causing any deformations in the piping system. We manufacture all our products under strict supervision from our experienced and knowledgeable team members. Our team members use the best raw materials using the best technology following international and national standards. If you have any queries about our products, contact us.
Table of Contents
- Stainless Steel Forged Fittings Spec Chart
- Price List of SS BSP Elbow
- Chemical Composition of ASTM A182 SS Union
- Mechanical Properties of SS Forged Fittings
- Equivalent Grade of Stainless Steel Coupling
- Types of Forged Stainless Steel Pipe Fittings
- Wall Thickness of ASTM A182 Stainless Steel Forged Fittings
- Weight Chart of ASME B16.11 SS Socket weld Fittings
- Dimensions of SS Socket Weld 90 Degree Elbows
- Know more about our clients worldwide
Stainless Steel Forged Fittings Spec Chart
| Specification : | Stainless Steel Forged Fittings |
| Dimensions Class: | 3000#, 6000#, 2000#, 9000# |
| Pressure: | Check Pressure Rating Of Socket, Threaded: 6000 LBS, 3000 LBS, 9000 LBS |
| Export to | Singapore, Indonesia, Dubai, Brazil, Ukraine, India, Thailand, Korea, Oman, Spain, Canada, USA, Ireland, Iran, Egypt, Saudi Arabia, Peru, etc |
|---|---|
| Size Chart Of: | 1/8” NB to 4” NB (Screwed-Socket) |
| Forged Type : | BSPT, NPT (Threaded), BSPP. |
| Mills And Origin : | Russian, USA, Europe, India, Japanese |
| Connection Type : | Welding |
Price List of SS BSP Elbow
| Stainless Steel Forged Fittings Price in India | ASTM A182 SS Fittings Price in INR | SS Forged Fittings Price in USD | Stainless Steel Forged Fittings Price in UAE Dirham |
| STAINLESS STEEL FORGED ELBOWS | Rs. 3,714 | 49.57 USD | UAE Dirham 182.07 |
Chemical Composition of ASTM A182 SS Union
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Ti | Fe | |
| 304 | min. | 18.0 | 8.0 | |||||||||
| max. | 0.08 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 | 0.10 | ||||
| 304L | min. | 18.0 | 8.0 | |||||||||
| max. | 0.030 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 12.0 | 0.10 | ||||
| 304H | min. | 0.04 | 18.0 | 8.0 | ||||||||
| max. | 0.010 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 | |||||
| SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 26.00 | 0.10 max | 19.00 21.00 | 54.7 min | |||
| SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 26.00 | 0.75 max | 19.00 21.00 | 53.095 min | |||
| SS 310H | 0.04 0.10 | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 26.00 | 19.00 21.00 | 53.885 min | ||||
| 316 | min. | 16.0 | 2.03.0 | 10.0 | ||||||||
| max. | 0.035 | 2.0 | 0.75 | 0.045 | 0.030 | 18.0 | 14.0 | |||||
| 316L | min. | 16.0 | 2.03.0 | 10.0 | ||||||||
| max. | 0.035 | 2.0 | 0.75 | 0.045 | 0.030 | 18.0 | 14.0 | |||||
| 316TI | 0.08 max | 10.00 14.00 | 2.0 max | 0.045 max | 0.030 max | 16.00 18.00 | 0.75 max | 2.00 3.00 | ||||
| 317 | 0.08 max | 2 max | 1 max | 0.045 max | 0.030 max | 18.00 20.00 | 3.00 4.00 | 57.845 min | ||||
| SS 317L | 0.035 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 18.00 20.00 | 3.00 4.00 | 11.00 15.00 | 57.89 min | |||
| SS 321 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 19.00 | 9.00 12.00 | 0.10 max | 5(C+N) 0.70 max | |||
| SS 321H | 0.04 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 19.00 | 9.00 12.00 | 0.10 max | 4(C+N) 0.70 max | |||
| 347/ 347H | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 20.00 | 9.0013.00 | |||||
| 410 | min. | 11.5 | ||||||||||
| max. | 0.15 | 1.0 | 1.00 | 0.040 | 0.030 | 13.5 | 0.75 | |||||
| 446 | min. | 23.0 | 0.10 | |||||||||
| max. | 0.2 | 1.5 | 0.75 | 0.040 | 0.030 | 30.0 | 0.50 | 0.25 | ||||
| 904L | min. | 19.0 | 4.00 | 23.00 | 0.10 | |||||||
| max. | 0.20 | 2.00 | 1.00 | 0.045 | 0.035 | 23.0 | 5.00 | 28.00 | 0.25 | |||
Buy directly from ss forged elbow stockist, Top-notch supplier of stainless steel npt fittings
Mechanical Properties of SS Forged Fittings
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 304/ 304L | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 304H | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 40 % |
| 310 / 310S / 310H | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 40 % |
| 306/ 316H | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 316L | 8.0 g/cm3 | 1399 °C (2550 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 317 | 7.9 g/cm3 | 1400 °C (2550 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 321 | 8.0 g/cm3 | 1457 °C (2650 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 347 | 8.0 g/cm3 | 1454 °C (2650 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 904L | 7.95 g/cm3 | 1350 °C (2460 °F) | Psi 71000 , MPa 490 | Psi 32000 , MPa 220 | 35 % |
Equivalent Grade of Stainless Steel Coupling
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
| SS 304L | 1.4306 / 1.4307 | S30403 | SUS 304L | 3304S11 | 03Х18Н11 | Z3CN18‐10 | X2CrNi18-9 / X2CrNi19-11 |
| SS 304H | 1.4301 | S30409 | – | – | – | – | – |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
| SS 310H | – | S31009 | – | – | – | – | – |
| SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | – | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
| SS 316H | 1.4401 | S31609 | – | – | – | – | – |
| SS 316Ti | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
| SS 317 | 1.4449 | S31700 | SUS 317 | – | – | – | – |
| SS 317L | 1.4438 | S31703 | SUS 317L | – | – | – | X2CrNiMo18-15-4 |
| SS 321 | 1.4541 | S32100 | SUS 321 | – | – | – | X6CrNiTi18-10 |
| SS 321H | 1.4878 | S32109 | SUS 321H | – | – | – | X12CrNiTi18-9 |
| SS 347 | 1.4550 | S34700 | SUS 347 | – | 08Ch18N12B | – | X6CrNiNb18-10 |
| SS 347H | 1.4961 | S34709 | SUS 347H | – | – | – | X6CrNiNb18-12 |
| SS 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
Types of Forged Stainless Steel Pipe Fittings
Forged Stainless Steel Pipe Fittings
Ss Npt Plug
Stainless Steel 304 Forged Fittings
Ss Forged Fittings
Ss Forged Elbow
1/8 Ss Npt Fittings
Stainless Steel Bsp Fittings
Stainless Steel Npt Fittings
Stainless Bsp Fittings
1 Inch Stainless Steel Coupling
Ss Bsp Fittings
Stainless Steel Forged Elbow
SS Forged Hex Nipple
ASTM A182 SS Forged Union
Forged SS Bushing
Ss Npt Fittings
PED Certified & Tested forged stainless steel pipe fittings
Wall Thickness of ASTM A182 Stainless Steel Forged Fittings
| Description | Stainless Steel Forged Fittings Class Designation | ||
|---|---|---|---|
| Class 3000 | Class 6000 | Class 9000 | |
| SW Elbows 45 degrees and NPT 90 Elbows degrees, SW Tees, NPT Crosses, SW Couplings, NPT Half-Couplings, Socket End or Pipe Caps |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 |
| 1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
| 1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
| NPS by Wall Thick. |
SCH80 | SCH160 | XXS |
Weight Chart of ASME B16.11 SS Socket weld Fittings
| Nominal Size | Approximate Weight/kg | |||
| DN | NPS | 3000 LB | 6000 LB | 9000 LB |
| 6 | 1/8 | 0.13 | 0.22 | |
| 8 | 1/4 | 0.13 | 0.22 | |
| 10 | 3/8 | 0.16 | 0.45 | |
| 15 | 1/2 | 0.35 | 0.55 | 1.15 |
| 20 | 3/4 | 0.4 | 0.9 | 1.8 |
| 25 | 1 | 0.66 | 1.46 | 2.25 |
| 32 | 1 1/4 | 1 | 1.9 | 3.95 |
| 40 | 1 1/2 | 1.4 | 3.4 | 4.87 |
| 50 | 2 | 2.2 | 3.7 | 8.89 |
| 65 | 2 1/2 | 4 | 7.2 | |
| 80 | 3 | 6.15 | 10.7 | |
| 100 | 4 | 14.3 | ||
Dimensions of SS Socket Weld 90 Degree Elbows
| NPS | A | B Max | B Min | C Avg | C Min |
| 1/8 | 11 | 11.2 | 10.8 | 3.18 | 3.18 |
| 1/4 | 11 | 14.6 | 14.2 | 3.78 | 3.3 |
| 3/8 | 13.5 | 18 | 17.6 | 4.01 | 3.5 |
| 1/2 | 15.5 | 22.2 | 21.8 | 4.67 | 4.09 |
| 3/4 | 19 | 27.6 | 27.2 | 4.9 | 4.27 |
| 1 | 22.5 | 34.3 | 33.9 | 5.69 | 4.98 |
| 1-1/4 | 27 | 43.1 | 42.7 | 6.07 | 5.28 |
| 1-1/2 | 32 | 49.2 | 48.8 | 6.35 | 5.54 |
| 2 | 38 | 61.7 | 61.2 | 6.93 | 6.04 |
| 2-1/2 | 41 | 74.4 | 73.9 | 8.76 | 7.67 |
| 3 | 57 | 90.3 | 89.8 | 9.52 | 8.3 |
| 4 | 66.5 | 115.7 | 115.2 | 10.69 | 9.35 |
| NPS | A | B Max | B Min | C Avg | C Min |
Buy directly ASME B16.11 stainless bsp fittings from stockist, Order custom sizes online ss forged hex bushing / coupling for faster delivery
Know more about our clients worldwide
| 201 malleable iron stainless steel NPT threaded pipe fittings | Belgium, Philippines, Indonesia, Dammam -KSA |
| stainless steel union male | Thailand, Europe, France, Qatar |
| Stainless Steel Male Equal Round Casting Silver Union 1" | Malaysia, Thailand, Germany, Czechia |
| SW Pipe fittings ASME B16.11 Stainless Steel 316 | Finland, Bangladesh, USA, Malaysia |
| 316L D25 3000LB Union | Brazil, Kuwait, Saudi Arabia (KSA), South Africa |
| 1/4" x 1/4" 6000psi 316 Stainless Steel Straight Union Connector | Singapore, Singapore, South Africa, Bahrain |
| stainless steel threaded pipe fittings Hex nipple 304 | Nigeria, UK, Australia, Philippines |
| STAINLESS STEEL-SS316 UNION ELBOW | UAE, Hong Kong, Malaysia, Oman |
| 316 stainless steel tee Male BSP NPT | Singapore, Iran, Italy, Chile |
| 150# Stainless Steel Forged Fitting Equal Tee | Malaysia, Norway, Turkey, United Arab Emirates (UAE) |
| Stainless Steel Union Male Run Tee Saline Water | Dubai, Russia, Malaysia, Netherlands |
| stainless steel bearing bushing | UK, Mexico, Spain, Egypt |
| 316L Stainless Steel Composite Bushing | UAE, Malaysia, Europe, United Kingdom -UK |
| forging stainless steel bushing with female thread | Ellington -United States, Poland, Canada, UK |
| Stainless Steel Hose Nipple Female | Singapore, Canada, Malaysia, Philippines |
| stainless steel 304/316 hex nipple | Malaysia, Romania, Japan, Europe |
| SS304 Nipple NPT Thread 3/8" x 1-1/2" | China, Malaysia, Colombia, Sweden |
| Stainless Steel High Pressure Forged BSPT Male Thread Connectors | Philippines, Los Alamos -Mexico, Taiwan, Malaysia |
| forged stainless steel 1/2" NPT male threaded nipple | Malaysia, NY 12203 (USA), South Korea, Singapore |