Copper-nickel or cupronickel, is made up of manganese, iron, and nickel. These Copper Nickel Pipe Flanges are highly resistant to corrosion and resist deformation under extreme temperatures. Along with this general strength, these flanges also possess a good amount of fatigue strength. These flanges are mostly seen in use in marine applications due to their resistance to seawater. It is also used in a lot of offshore industries due to its durability and distinct properties. We are one of the top Copper Nickel Flanges manufacturers in India who focus on creating high-quality products at the most reasonable prices.
90/10 flanges contain 90% of copper and 10% of nickel. The Cupro Nickel 90/10 Slip on Flanges is a popular flange because of its costs as well as its applications. It can be easily slid on pipes and attached via welding. These flanges are available either as raised face flanges or flat face slip-on flanges. The 90/10 cuni Socket Weld Flanges is suitable for low pressure and temperature scenarios. Here the pipe is fitted in the socket end, and a fillet weld is applied to fix the connection. All our products can be customized into different shapes and sizes as per your requirements.
The 70/30 Copper Blind Flange is made up of 30% nickel and the rest is made from chromium. This flange is stronger as compared to the 90/10 flanges and is used to block or isolate pipelines in a piping system. Copper Nickel Threaded Flange is also referred to as companion flanges and is common when reducing connections. Our fantastic workers use the best raw materials and cutting-edge technology to produce the best flanges. Want to know more about our products contact us.
Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
---|---|
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
Connect Type/ Flange Face Type | Ring Type Joint (RTJ), Raised Face (RF), Lap-Joint Face (LJF), Small Male-Female (SMF), Flat Face (FF), Large Male-Female (LMF), Small Tongue, Large Tongue & Groove, Groove |
Uses & application |
|
UNI | 6Bar 10Bar 25Bar 16Bar 40Bar |
EN | 25Bar 6Bar 10Bar 16Bar 40Bar |
Pressure Rating ANSI | 600 LBS, 900 LBS, 150 LBS, 2500 LBS, 300 LBS, 1500 LBS |
Pressure Calculation in DIN | 16Bar 6Bar 25Bar 40Bar 10Bar / PN10 PN16 PN6 PN25 PN64 PN40 |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Coating | Zinc Plated,Oil Black Paint, Cold and Hot Dip Galvanized, Anti-rust Paint, Yellow Transparent |
Test | Direct-reading Spectrograph, UI trasonic flaw detector, Hydrostatic testing machine, X-ray detector, Magnetic particle detector |
Standards | API605, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, ASME Flanges, API7S-15, API7S-43, BS Flanges, DIN Flanges, EN Flanges, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, EN1092 |
Most common types | Threaded / Screwed / Forged / Plate |
Equipment | Pushing Machine, Press machine, electric bevelling machine, Bending machine, Sand-blasting machine etc |
Origin | West Europe / Japan / Indian / USA / Korean |
Export to | Oman, Spain, Canada, USA, Ireland, Dubai, Singapore, Indonesia, Ukraine, Korea, Iran, India, Saudi Arabia, Thailand, Egypt, Brazil, Peru, etc |
Copper Nickel Flanges Price in India | Cuni Pipe Flange Price in INR | Cupro Nickel Flanges Price in USD | Cuni Pipe Flange Price in UAE Dirham |
COPPER-NICKEL 90/10 BLIND FLANGE RF ASME B16.5 UNS C70600 | Rs. 40,306 | 537.91 USD | UAE Dirham 1975.86 |
COPPER-NICKEL 90/10 SOLID W/N FLANGE FF ASME B16.5 UNS C70600 | Rs. 16,251 | 216.88 USD | UAE Dirham 796.65 |
Grade |
Cu |
Mn |
Pb |
Ni |
Fe |
Zn |
Cupro Nickel 90/10 |
88.6 min |
1.0 max |
0.05 max |
9-11 max |
1.8 max |
1 max |
Cupro Nickel 70/30 |
65 min |
1.0 max |
0.05 max |
29-33 max |
0.4-1.0 max |
1 max |
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
0.323 lb/in3 at 68 F |
2260 F |
50000 psi |
20000 psi |
30 % |
0.323 lb/in3 at 68 F |
2260 F |
50000 psi |
20000 psi |
30 % |
STANDARD |
WERKSTOFF NR. |
UNS |
Cupro Nickel 90/10 |
2.0872 |
C70600 |
Cupro Nickel 70/30 |
2.0882 |
C71500 |
CLASS | Nominal Pipe Size | Slip On Flange | Threaded Flange | Socket Weld Flange | Lap Joint Flange | Blind Flange | Weld Neck Flange |
---|---|---|---|---|---|---|---|
150 lb | ½ | 1 | 1 | 2 | 1 | 2 | 2 |
¾ | 2 | 2 | 2 | 2 | 2 | 2 | |
1 | 2 | 2 | 2 | 2 | 2 | 3 | |
1¼ | 3 | 3 | 3 | 3 | 3 | 3 | |
1½ | 3 | 3 | 3 | 3 | 4 | 4 | |
2 | 5 | 5 | 5 | 5 | 5 | 6 | |
2½ | 8 | 8 | 8 | 8 | 7 | 10 | |
3 | 9 | 9 | 9 | 9 | 9 | 11.5 | |
3½ | 11 | 12 | 11 | 11 | 13 | 12 | |
4 | 13 | 13 | 13 | 13 | 17 | 16.5 | |
5 | 15 | 15 | 15 | 15 | 20 | 21 | |
6 | 19 | 19 | 19 | 19 | 27 | 26 | |
8 | 30 | 30 | 30 | 30 | 47 | 42 | |
10 | 43 | 43 | 43 | 43 | 70 | 54 | |
12 | 64 | 64 | 64 | 64 | 123 | 88 | |
14 | 90 | 90 | 90 | 105 | 140 | 114 | |
16 | 106 | 98 | 98 | 140 | 180 | 140 | |
18 | 130 | 130 | 130 | 160 | 220 | 165 | |
20 | 165 | 165 | 165 | 195 | 285 | 197 | |
22 | 185 | 185 | 185 | 245 | 355 | 225 | |
24 | 220 | 220 | 220 | 275 | 430 | 268 | |
CLASS | Nominal Pipe Size | Slip On | Threaded | Socket Weld | Lap Joint | Blind | Weld Neck |
300 lb | ½ | 2 | 2 | 3 | 2 | 2 | 2 |
¾ | 3 | 3 | 3 | 3 | 3 | 3 | |
1 | 3 | 3 | 3 | 3 | 4 | 4 | |
1¼ | 4.5 | 4.5 | 4 | 4.5 | 6 | 5 | |
1½ | 6.5 | 6.5 | 6 | 6.5 | 7 | 7 | |
2 | 7 | 7 | 7 | 7 | 8 | 9 | |
2½ | 10 | 10 | 10 | 10 | 12 | 12 | |
3 | 13 | 14 | 13 | 14.5 | 16 | 18 | |
3½ | 17 | 17 | 17 | 17 | 21 | 20 | |
4 | 23.5 | 24 | 22 | 24 | 28 | 26.5 | |
5 | 29 | 31 | 28 | 28 | 37 | 36 | |
6 | 39 | 39 | 39 | 39 | 50 | 45 | |
8 | 58 | 58 | 58 | 58 | 81 | 69 | |
10 | 81 | 81 | 81 | 91 | 124 | 100 | |
12 | 115 | 115 | 115 | 140 | 185 | 142 | |
14 | 165 | 165 | 165 | 190 | 250 | 206 | |
16 | 210 | 220 | 190 | 234 | 315 | 250 | |
18 | 253 | 280 | 250 | 305 | 414 | 320 | |
20 | 315 | 325 | 315 | 375 | 515 | 400 | |
22 | 370 | 370 | 370 | 435 | 640 | 465 | |
24 | 490 | 490 | 475 | 550 | 800 | 580 | |
CLASS | Nominal Pipe Size | Slip On | Threaded | Socket Weld | Lap Joint | Blind | Weld Neck |
400 lb | ½ | 2 | 2 | 2 | 2 | 2 | 3 |
¾ | 3 | 3 | 3 | 3 | 3 | 3.5 | |
1 | 3.5 | 3.5 | 3.5 | 3.5 | 4 | 4 | |
1¼ | 4.5 | 4.5 | 4.5 | 4.5 | 6 | 4.5 | |
1½ | 6.5 | 6.5 | 6.5 | 6.5 | 8 | 8 | |
2 | 8 | 8 | 8 | 8 | 10 | 10 | |
2½ | 12 | 12 | 12 | 11 | 15 | 14 | |
3 | 15 | 15 | 15 | 14 | 20 | 18 | |
3½ | 21 | 21 | 21 | 20 | 29 | 26 | |
4 | 26 | 26 | 26 | 25 | 33 | 35 | |
5 | 31 | 31 | 31 | 29 | 44 | 43 | |
6 | 44 | 44 | 44 | 42 | 61 | 57 | |
8 | 67 | 67 | 67 | 64 | 100 | 89 | |
10 | 91 | 91 | 91 | 110 | 155 | 125 | |
12 | 130 | 130 | 130 | 152 | 226 | 175 | |
14 | 191 | 191 | 191 | 210 | 310 | 233 | |
16 | 253 | 253 | 253 | 280 | 398 | 295 | |
18 | 310 | 310 | 310 | 345 | 502 | 360 | |
20 | 378 | 378 | 378 | 420 | 621 | 445 | |
22 | 405 | 405 | 405 | 455 | 720 | 505 | |
24 | 539 | 539 | 539 | 615 | 936 | 640 | |
CLASS | Nominal Pipe Size | Slip On | Threaded | Socket Weld | Lap Joint | Blind | Weld Neck |
600 lb | ½ | 2 | 2 | 2 | 2 | 3 | 3 |
¾ | 3 | 3 | 3 | 3 | 4 | 4 | |
1 | 4 | 4 | 4 | 4 | 4 | 4 | |
1¼ | 5 | 5 | 5 | 5 | 6 | 6 | |
1½ | 7 | 7 | 7 | 7 | 8 | 8 | |
2 | 9 | 9 | 9 | 9 | 10 | 12 | |
2½ | 13 | 13 | 13 | 12 | 15 | 18 | |
3 | 16 | 16 | 16 | 15 | 20 | 23 | |
3½ | 21 | 21 | 21 | 20 | 29 | 26 | |
4 | 37 | 37 | 37 | 36 | 41 | 42 | |
5 | 63 | 63 | 63 | 63 | 68 | 68 | |
6 | 80 | 80 | 80 | 78 | 86 | 81 | |
8 | 115 | 15 | 15 | 112 | 140 | 120 | |
10 | 177 | 177 | 177 | 195 | 231 | 190 | |
12 | 215 | 215 | 215 | 240 | 295 | 226 | |
14 | 259 | 259 | 259 | 290 | 378 | 347 | |
16 | 366 | 366 | 366 | 400 | 527 | 481 | |
18 | 476 | 476 | 476 | 469 | 665 | 555 | |
20 | 612 | 612 | 612 | 604 | 855 | 690 | |
22 | 590 | 590 | 590 | 670 | 1000 | 720 | |
24 | 876 | 876 | 876 | 866 | 1250 | 977 | |
CLASS | Nominal Pipe Size | Slip On | Threaded | Socket Weld | Lap Joint | Blind | Weld Neck |
900 lb | ½ | 6 | 6 | 6 | 6 | 4 | 7 |
¾ | 6 | 6 | 6 | 6 | 6 | 7 | |
1 | 7.5 | 7.5 | 7.5 | 7.5 | 9 | 8.5 | |
1¼ | 10 | 10 | 10 | 10 | 10 | 10 | |
1½ | 14 | 14 | 14 | 14 | 14 | 14 | |
2 | 22 | 22 | 22 | 21 | 25 | 24 | |
2½ | 31 | 31 | 31 | 25 | 32 | 31 | |
3 | 36 | 36 | 36 | 29 | 35 | 36 | |
4 | 53 | 53 | 53 | 51 | 54 | 53 | |
5 | 83 | 83 | 83 | 81 | 87 | 86 | |
6 | 110 | 110 | 110 | 105 | 115 | 110 | |
8 | 172 | 172 | 172 | 190 | 200 | 187 | |
10 | 245 | 245 | 245 | 277 | 290 | 268 | |
12 | 326 | 326 | 326 | 371 | 415 | 372 | |
14 | 400 | 400 | 400 | 415 | 520 | 562 | |
16 | 459 | 459 | 459 | 488 | 619 | 685 | |
18 | 647 | 647 | 647 | 670 | 880 | 924 | |
20 | 792 | 792 | 792 | 868 | 1107 | 1164 | |
24 | 1480 | 1480 | 1480 | 1659 | 2099 | 2107 | |
CLASS | Nominal Pipe Size | Slip On | Threaded | Socket Weld | Lap Joint | Blind | Weld Neck |
1500 lb | ½ | 6 | 6 | 6 | 6 | 4 | 7 |
¾ | 6 | 6 | 6 | 6 | 6 | 7 | |
1 | 8 | 8 | 8 | 8 | 9 | 9 | |
1¼ | 10 | 10 | 10 | 10 | 10 | 10 | |
1½ | 14 | 14 | 14 | 14 | 14 | 14 | |
2 | 25 | 25 | 25 | 25 | 25 | 25 | |
2½ | 36 | 36 | 36 | 35 | 35 | 36 | |
3 | 48 | 48 | 48 | 47 | 48 | 48 | |
4 | 73 | 73 | 73 | 75 | 73 | 73 | |
5 | 132 | 132 | 132 | 140 | 140 | 132 | |
6 | 165 | 165 | 165 | 170 | 160 | 165 | |
8 | 260 | 260 | 260 | 286 | 302 | 275 | |
10 | 436 | 436 | 436 | 485 | 510 | 455 | |
12 | 667 | 667 | 667 | 749 | 775 | 690 | |
14 | 940 | 940 | 940 | 890 | 975 | 940 | |
16 | 1250 | 1250 | 1250 | 1250 | 1300 | 1250 | |
18 | 1625 | 1625 | 1625 | 1475 | 1750 | 1625 | |
20 | 2050 | 2050 | 2050 | 1775 | 2225 | 2050 | |
24 | 2825 | 2825 | 2825 | 2825 | 3625 | 3325 | |
CLASS | Nominal Pipe Size | Slip On | Threaded | Socket Weld | Lap Joint | Blind | Weld Neck |
2500 lb | ½ | …. | 7 | …. | 7 | 7 | 8 |
¾ | …. | 9 | …. | 8 | 10 | 9 | |
1 | …. | 12 | …. | 12 | 12 | 13 | |
1¼ | …. | 18 | …. | 17 | 18 | 20 | |
1½ | …. | 25 | …. | 24 | 25 | 28 | |
2 | …. | 38 | …. | 37 | 39 | 42 | |
2½ | …. | 55 | …. | 53 | 56 | 52 | |
3 | …. | 83 | …. | 80 | 86 | 94 | |
4 | …. | 127 | …. | 122 | 133 | 146 | |
5 | …. | 210 | …. | 204 | 223 | 244 | |
6 | …. | 323 | …. | 314 | 345 | 378 | |
8 | …. | 485 | …. | 471 | 533 | 576 | |
10 | …. | 925 | …. | 897 | 1025 | 1068 | |
12 | …. | 1300 | …. | 1262 | 1464 | 1608 |
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
Table D | 95 | 67 | 4 | 13 | 14 | |
Table E | 95 | 67 | 4 | 13 | 14 | |
Table F | 95 | 67 | 4 | 13 | 14 | |
Table H | 114 | 83 | 4 | 16 | 17 | |
Table J | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
PN10 | 95 | 65 | 4 | M12 | 14 | |
PN16 | 95 | 65 | 4 | M12 | 14 | |
PN20 | 90 | 60.5 | 4 | M14 | 16 | |
PN25 | 95 | 65 | 4 | M12 | 14 | |
PN40 | 95 | 65 | 4 | M12 | 14 |
ANSI/ASME B16.34 | PRESSURE RATING CHART | ||||||
Temperature °F | 150# | 300# | 400# | 600# | 900# | 1500# | 2500# |
-20 to 100 | 275 | 720 | 960 | 1440 | 2160 | 3600 | 6000 |
200 | 230 | 600 | 800 | 1200 | 1800 | 3000 | 5000 |
300 | 205 | 540 | 720 | 1080 | 1620 | 2700 | 4500 |
400 | 190 | 495 | 660 | 995 | 1490 | 2485 | 4140 |
500 | 170 | 465 | 620 | 930 | 1395 | 2330 | 3880 |
600 | 140 | 435 | 580 | 875 | 1310 | 2185 | 3640 |
650 | 125 | 430 | 575 | 860 | 1290 | 2150 | 3580 |
700 | 110 | 425 | 565 | 850 | 1275 | 2125 | 3540 |
750 | 95 | 415 | 555 | 830 | 1245 | 2075 | 3460 |
800 | 80 | 405 | 540 | 805 | 1210 | 2015 | 3360 |
850 | 65 | 395 | 530 | 790 | 1190 | 1980 | 3300 |
900 | 50 | 390 | 520 | 780 | 1165 | 1945 | 3240 |
950 | 35 | 380 | 510 | 765 | 1145 | 1910 | 3180 |
1000 | 20 | 320 | 430 | 640 | 965 | 1605 | 2675 |
1050 | 20 | 310 | 410 | 615 | 925 | 1545 | 2570 |
1100 | 20 | 255 | 345 | 515 | 770 | 1285 | 2145 |
1150 | 20 | 200 | 265 | 400 | 595 | 995 | 1655 |
1200 | 20 | 155 | 205 | 310 | 465 | 770 | 1285 |
1250 | 20 | 115 | 150 | 225 | 340 | 565 | 945 |
1300 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |
1350 | 20 | 60 | 80 | 125 | 185 | 310 | 515 |
1400 | 20 | 50 | 65 | 95 | 145 | 240 | 400 |
1450 | 15 | 35 | 45 | 70 | 105 | 170 | 285 |
1500 | 10 | 25 | 35 | 55 | 80 | 135 | 230 |
Cuni Flanges C71500 Raised Face Weld Neck Flange | Singapore, Italy, Chile, Iran |
Copper nickel 70/30 12 inch pipe flange | China, Colombia, Sweden, Malaysia |
Copper nickel blind plate 150# 11/2'' flanges | Malaysia, Germany, Czechia, Thailand |
1.6mn 150# Copper Nickel Alloy flange | Belgium, Indonesia, Dammam -KSA, Philippines |
copper nickel 90/10 Welding Neck Flange | Singapore, South Africa, Bahrain, Singapore |
WNR 2.0882 Cu-Ni Long Weld Neck Flange | Brazil, Saudi Arabia (KSA), South Africa, Kuwait |
CUNI 90/10 C70600 WELDING NECK FLANGE 600# | UAE, Europe, United Kingdom -UK, Malaysia |
forging C71500 copper nickel flange | UAE, Malaysia, Oman, Hong Kong |
ASME SB152M Cooper Nickel Expander Flanges | Malaysia, Japan, Europe, Romania |
Copper Nickel Alloy 70/30 Slip On Raised Face Flange | Finland, USA, Malaysia, Bangladesh |
Uns C70600 Plate Flanges | Malaysia, Turkey, United Arab Emirates (UAE), Norway |
Cooper Nickel Alloy C70600 Flat Face Blind Flange BL 600# | UK, Spain, Egypt, Mexico |
Copper Nickel ASTM B151 Blind Flange | Philippines, Taiwan, Malaysia, Los Alamos -Mexico |
90/10 Cupro Nickel Forged Socket Weld Pipe Flange | Dubai, Malaysia, Netherlands, Russia |
CuNi 70/30 WN Flange 1'' 300lbs SCH40 | Thailand, France, Qatar, Europe |
Copper Nickel Flat Face Welding Neck Flange | Malaysia, South Korea, Singapore, NY 12203 (USA) |
70/30 Cuni Blind Ring Type Joint Flange | Nigeria, Australia, Philippines, UK |
Cupro Nickel 70/30 Weld Neck Ring Type Joint Flange | Ellington -United States, Canada, UK, Poland |
cuni 90/10 Raised Face Flanges | Singapore, Malaysia, Philippines, Canada |