Duplex 2205 Flanges

Check Pressure Rating of ASTM A182 UNS S31803 Slip on Flange, Manufacturer of SAF 2205 Weld Neck Flanges

2205 flanges are made up of austenitic stainless steel. These Duplex 2205 Flanges are highly resistant to corrosion and stress and have a high yield and tensile strength. These flanges have higher ductility as compared to stainless ferritic steel grades. They are widely used in oil and gas, petrochemical plants, nuclear projects, etc. Over the past decade, we have been the leading manufacturer and supplier of duplex stainless steel flanges. Our goal is to produce the best products at the most reasonable rates for all.

Biggest ANSI B16.5 Duplex Stainless Steel 2205 RTJ Flange Supplier, Refer Dimensions of SAF 2205 Slip On Flanges

The ANSI B16.5 Duplex Stainless Steel 2205 RTJ Flange is a high integrity-sealing flange. This stainless flange can withstand pressures and temperatures above 700-800 degrees. These flanges are commonly used when mating flanges that require a metal-to-metal connector. The ASTM A182 UNS S31803 Slip on Flange is a popular low cost flange available in various sizes. The 2205 Duplex Blind Flanges is the only flange that can be used to close or restrict pipelines. It is designed without a hub and can be easily bolted to the pipe. This Duplex flange can be easily removed and refitted for inspection or maintenance. Our experienced staff uses the latest technology while using the best raw materials to produce the best flanges following national and international standards.

The UNS S31803 Weld Neck Flange is used in high-pressure piping systems. This flange has an elongated hub this enables it to connect other pressure pipe allowing it to give them support during various processes. The SAF 2205 Weld Neck Flanges is considered the best flange for high-pressure process piping. These flanges require them to be butt welded for installation. All our Duplex Steel Flanges can be customized into different shapes and sizes, which suit our client’s requirements. Want to know more about our products? Contact us to know more.

Specification List of Duplex 2205 Flanges

Size Chart 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
UNI 6Bar 10Bar 25Bar 16Bar 40Bar
EN 25Bar 6Bar 10Bar 16Bar 40Bar
Connect Type/ Flange Face Type Ring Type Joint (RTJ), Raised Face (RF), Lap-Joint Face (LJF), Small Male-Female (SMF), Flat Face (FF), Large Male-Female (LMF), Small Tongue, Large Tongue & Groove, Groove
Uses & application
  • Petrochemicals and acids.
  • Nuclear power (mostly seamless).
  • Bitumen upgraders.
  • Heavy oil refineries.
Pressure Rating ANSI 600 LBS, 900 LBS, 150 LBS, 2500 LBS, 300 LBS, 1500 LBS
Pressure Calculation in DIN 16Bar 6Bar 25Bar 40Bar 10Bar / PN10 PN16 PN6 PN25 PN64 PN40
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Coating Zinc Plated,Oil Black Paint, Cold and Hot Dip Galvanized, Anti-rust Paint, Yellow Transparent
Most common types Threaded / Screwed / Forged / Plate
Equipment Pushing Machine, Press machine, electric bevelling machine, Bending machine, Sand-blasting machine etc
Origin West Europe / Japan / Indian / USA / Korean
Test Direct-reading Spectrograph, UI trasonic flaw detector, Hydrostatic testing machine, X-ray detector, Magnetic particle detector
Standards API605, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, ASME Flanges, API7S-15, API7S-43, BS Flanges, DIN Flanges, EN Flanges, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, EN1092
Export to Dubai, Singapore, Indonesia, Ukraine, Korea, Iran, India, Saudi Arabia, Thailand, Egypt, Oman, Spain, Canada, USA, Ireland, Brazil, Peru, etc
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Price List of ANSI B16.5 Duplex Stainless Steel Flange

Duplex 2205 Flanges Price in India ASTM A182 UNS S31803 Flanges Price in INR SAF 2205 Flanges Price in USD Duplex 2205 Flanges Price in UAE Dirham
SO FLANGE 3MM DUPLEX 2205 Rs. 12,275 163.82 USD UAE Dirham 601.74
FLANGES GRADE DUPLEX 2205 Rs. 141 1.88 USD UAE Dirham 6.91

Chemical Structure of ASTM A182 UNS S31803 Slip on Flange

C N P Si Mn Mo Fe Cr S Ni
1.0 0.03 0.02 2.0 3.0 - 3.5 22.0 - 23.0 0.03 4.5 - 6.5 0.14 - 0.2 Bal

View Price List of UNS S31803 Weld Neck Flange, Stockist of 2205 Duplex Blind Flanges

Mechanical Behaviour of SAF 2205 Weld Neck Flanges

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi - 80000 , MPa - 550 Psi - 116000 , MPa - 800 15 %

Equivalent of 2205 Duplex Blind Flanges

STANDARD UNS WERKSTOFF NR.
Duplex S31803 S31803 1.4462

Physical Properties of DIN 1.4462 Plate Flanges

Grade

Density
(kg/m3)

Elastic
Modulus

(GPa)

Mean Co-eff of Thermal
Expansion (μm/m/°C)

Thermal
Conductivity (W/m.K)

Specific
Heat
0-100°C

( J/kg.K)

Electrical
Resistivity
(nΩ.m)

0-100°C

0-315°C

0-538°C

at 100°C

at 500°C

2205

782

190

13.7

14.2

-

19

-

418

850

We Keep Ready Stock of Class 150 Duplex S31803 Slip On Flanges. Refer 2205 uns s31803 Socket weld Flanges Weight Chart

Most popular types of Duplex Steel 2205 Forged Flange

Dimensions of Duplex S31803 Slip On Flanges

Class 150 Flange Dimensions
Nominal Size Outside Diameter
(OD)
Min. Thickness
(T)
RF Dia.
(R)
No. of Bolt Holes Diameter of Holes Bolt Circle
(BC)
SO Bore ID
(SB)
WN Bore ID
(WB)
Dia. Hub Base
(HB)
Dia. of Hub Top
(HT)
SO LTH
(SL)
WN LTH
(WL)
12 3.50 0.38 1.38 4 0.62 2.38 0.88 0.62 1.19 0.84 0.56 1.81
34 3.88 0.44 1.69 4 0.62 2.75 1.09 0.82 1.50 1.05 0.56 2.00
1 4.25 0.50 2.00 4 0.62 3.12 1.36 1.05 1.94 1.32 0.62 2.12
114 4.62 0.56 2.50 4 0.62 3.50 1.70 1.38 2.31 1.66 0.75 2.19
112 5.00 0.62 2.88 4 0.62 3.88 1.95 1.61 2.56 1.90 0.81 2.38
2 6.00 0.69 3.62 4 0.75 4.75 2.44 2.07 3.06 2.38 0.94 2.44
212 7.00 0.81 4.12 4 0.75 5.50 2.94 2.47 3.56 2.88 1.06 2.69
3 7.50 0.88 5.00 4 0.75 6.00 3.57 3.07 4.25 3.50 1.12 2.69
312 8.50 0.88 5.50 8 0.75 7.00 4.07 3.55 4.81 4.00 1.19 2.75
4 9.00 0.88 6.19 8 0.75 7.50 4.57 4.03 5.31 4.50 1.25 2.94
5 10.00 0.88 7.31 8 0.88 8.50 5.66 5.05 6.44 5.56 1.38 3.44
6 11.00 0.94 8.50 8 0.88 9.50 6.72 6.07 7.56 6.63 1.50 3.44
8 13.50 1.06 10.62 8 0.88 11.75 8.72 7.98 9.69 8.63 1.69 3.94
10 16.00 1.12 12.75 12 1.00 14.25 10.88 10.02 12.00 10.75 1.88 3.94
12 19.00 1.19 15.00 12 1.00 17.00 12.88 12.00 14.38 12.75 2.12 4.44
14 21.00 1.31 16.25 12 1.12 18.75 14.14 13.25 15.75 14.00 2.19 4.94
16 23.50 1.38 18.50 16 1.12 21.25 16.16 15.25 18.00 16.00 2.44 4.94
18 25.00 1.50 21.00 16 1.25 22.75 18.18 17.25 19.88 18.00 2.62 5.44
20 27.50 1.62 23.00 20 1.25 25.00 20.20 19.25 22.00 20.00 2.81 5.62
22 29.50 1.75 25.25 20 1.38 27.25 22.22 21.25 24.25 22.00 3.07 5.82
24 32.00 1.81 27.25 20 1.38 29.50 24.25 23.25 26.12 24.00 3.19 5.94

Weight Chart of Duplex Steel 2205 Flanges

Standard Class Diameter Bolt Circle Diameter Number of Bolts Bolt Size Diameter of Bolt Hole
AS4087 PN14 95 67 4 M12 14
AS 2129 Table C 95 67 4 13 14
Table D 95 67 4 13 14
Table E 95 67 4 13 14
Table F 95 67 4 13 14
Table H 114 83 4 16 17
Table J 114 83 4 16 17
ANSI B16.5 ANSI 150 89 60 4 13 16
ANSI 300 95 67 4 13 16
ANSI 600 95 67 4 13 16
ANSI 900 121 83 4 19 22
ANSI 1500 121 83 4 19 22
ISO 7005 (DIN) PN6 80 55 4 M10 11
PN10 95 65 4 M12 14
PN16 95 65 4 M12 14
PN20 90 60.5 4 M14 16
PN25 95 65 4 M12 14
PN40 95 65 4 M12 14
Call Us to get Lastest Stock Report and Price List of DIN 1.4462 Plate Flanges & Duplex Steel 2205 Forged Flange.

Saf 2205 Flange Pressure Rating

Temp. ℃ Pressure-temperature rating for ASME B16.47 by class, bar
75 150 300 400 600 900
-29 to 38 10.0 20.0 51.7 68.9 103.4 155.1
50 9.8 19.5 51.7 68.9 103.4 155.1
100 8.8 17.7 50.7 67.5 101.3 152.0
150 7.9 15.8 45.9 61.2 91.9 137.8
200 6.9 13.8 42.7 56.9 85.3 128.0
250 6.0 12.1 40.5 53.9 80.9 121.4
300 5.1 10.2 38.9 51.8 77.7 116.6

Dimensions Tolerance of 2205 uns s31803 Flanges

Outside Diameter
≤ 24 = 1.6 mm | > 24 = ± 3.2 mm
Inside Diameter
not applicable
Diameter of Contact Face
1.6 mm Raised Face = ± 0.8 mm
6.35 mm Raised Face, Tongue & Groove / Male-Female = ± 0.4 mm
Outside Diameter of Hub
≤ 12 = + 2.4 mm / – 1.6 mm | ≥ 14 = ± 3.2 mm
Diameter of Counterbore
not applicable
Drilling
Bolt Circle = 1.6 mm | Bolt Hole Spacing = ± 0.8 mm
Eccentricity of Bolt Circle with Respect to Facing
≤ 2½ = 0.8 mm max. | ≥ 3 = 1.6 mm max.
Thickness
≤ 18 = + 3.2 mm / – 0 | ≥ 20 = + 4.8 mm / – 0
Length thru Hub
≤ 18 = + 3.2 mm / – 0.8 mm | ≥ 20 = + 4.8 mm / – 1.6 mm

Heat Resistance of Duplex Ss 2205 Flanges

Heat Resistance 300°C

Best Material Supplied In Following Countries

1/2" - 96" 1500LBS Duplex Stainless Steel WN Flange Singapore, Malaysia, United Kingdom -UK, NY 12203 (USA)
Forged 2205 Duplex Stainless Steel 2" Weld Neck Flange Malaysia, Germany, Malaysia, Turkey
DUPLEX 2205 ASME B16.5 1/2" - 24" 150# RF BLIND FLANGE Europe, Norway, United Arab Emirates (UAE), Romania
1/2" - 24" Duplex 2205 ASME Stainless Steel Blind Flange South Africa, Taiwan, Philippines, Kuwait
150# ASME Duplex Stainless Steel 2205 Slip On Flange UK, Saudi Arabia (KSA), Brazil, Spain
Forged Flange 2205 Duplex Stainless Steel 2'' SCH40 Malaysia, Mexico, Egypt, Los Alamos -Mexico
UNS S32205 ANSI B16.5 Class 150 Raised Face Weld Neck Flange Dubai, USA, Finland, Malaysia
duplex 2205 150 lb 2 inch pipe Flange Bahrain, South Korea, Malaysia, Singapore
2205 type quick closing flange UAE, South Africa, Singapore, Europe
Steel 2205 DN32 jis 10k plate flange Qatar, Malaysia, Singapore, Europe
2205 RF LJW Lap Joint Flange 4" class900 ANSI B16.5 Philippines, Iran, Chile, Canada
Duplex Stainless Steel 2205 Plate Flange Philippines, Indonesia, Belgium, UK
Duplex 2205 Flange 1 1/2" Class 600 SO RF Ellington -United States, Australia, Nigeria, Canada
Astm A182 f51 DN300 2500# SCH 40 RTJ LWN flange Czechia, Japan, Malaysia, Jakarta, Thailand
PN16 duplex 2205 stainless steel flange Singapore, Malaysia, UAE, Italy
ANSI B16.5 duplex steel F51 WN RF Welding neck Flange Sweden, Russia, Netherlands, Malaysia
2'' 600LB SCH40s Duplex Stainless Steel Blind Flanges Oman, France, Thailand, Hong Kong
ASME B16.5 Duplex steel 1/2"-24" 150#-2500# WN Flange Dammam -KSA, Poland, UK, Philippines
2205 Duplex Stainless Steel 10" Class150 ASME B16.5 Malaysia, Colombia, China, Bangladesh