Duplex is an austenitic ferrite portion of a mixed microstructure. Duplex 2205 Sheet is an enhanced nitrogen sheet, which is made up of high amounts of chromium and molybdenum. This makes this sheet highly corrosion-resistant at the same time, provides it with good strength and durability. The ASTM A240 Type 2205 Plate can be used in place of expensive alloys. These plates have higher ductility as compared to stainless ferritic steel grades. These Duplex 2205 Stainless Steel Sheet are widely used in chemical processing, transport, and storage of oil and gases, offshore rigs, etc. Over the past decade, we have been the leading manufacturer of Duplex 2205 Sheet. Our goal is to produce the best products at the most reasonable rates for all. We are amongst a few Duplex Plate suppliers who offer to provide sheets of different sizes according to your requirements.
Coils can be produced by cold or hot rolling processes. The 2205 SS hot rolled coil is produced at high temperatures. This allows the material to be easily formed and easy to work with. The SAF 2205 Strip, when hot-rolled have a thickness of up to 12.7mm while it has a thickness of up to 1.50mm if they are cold-rolled. Alloy 2205 Foil consists of ferrite and austenitic of equal proportion. This allows them to be used in wrapping tools when they are heat-treated.
Our experienced staff uses the latest technology while using the best raw materials to produce the duplex stainless steel plate along with all our other products. This is done following national and international standards. If you have any questions about our Duplex 2205 Sheet or other products, contact us for more information.
ASTM Specification | ASTM A240 / ASME SA240 |
---|---|
Length & Sizes | 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available |
Finish | Cold rolled sheet (CR), 2B, 2D, Hot rolled plate (HR), BA NO(8), SATIN (Met with Plastic Coated) |
Value Added Service | Annealed, Pickling, Polish, Cladding, Rolling, Cutting, Heat Treatment, Bending, Forging, Minor Fabrication Etc. |
Profiling |
To provide a full profiling service we use numerous profiling methods including:
|
Thickness | 0.1mm to 100 mm Thk |
Stock in form of | Plate, Sheet, hot rolled, cold rolled, annealed, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Coils, descaled, sheared, tread plate, Foils, Rolls, Plain Sheet, Flat Shim, Blank (Circle), soft annealed, Checker Plate |
Width | 10-2500mm |
Hardness | Half Hard, Quarter Hard, Soft, Hard, Spring Hard etc. |
Test Report |
|
Temper | Annealed |
Export to | Brazil, Singapore, Indonesia, Canada, India, Ukraine, Thailand, Egypt, Ireland, Saudi Arabia, Oman, Dubai, Korea, Iran, Spain, USA, Peru, etc |
We offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Duplex 2205 Sheet Price in India | ASTM A240 Type 2205 Plate Price in INR | SAF 2205 Sheet Price in USD | Duplex 2205 Stainless Steel Plate Price in UAE Dirham |
SHEET/PLATE DUPLEX 2205 (SIZE: THK:06 TO 08 X WIDTH: 1500 TO 2000 X LENGTH: 2555 TO 4000 MM) | Rs. 110 | 1.47 USD | UAE Dirham 5.39 |
DUPLEX STAINLESS STEEL HOT ROLLED SHEET GRADE 2205 WIDTH 2000 MM THK 6 MM | Rs. 304 | 4.06 USD | UAE Dirham 14.90 |
C | N | P | Si | Mn | Mo | Fe | Cr | S | Ni |
1.0 | 0.03 | 0.02 | 2.0 | 3.0 - 3.5 | 22.0 - 23.0 | 0.03 | 4.5 - 6.5 | 0.14 - 0.2 | Bal |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
7.8 g/cm3 | 1350 °C (2460 °F) | Psi - 80000 , MPa - 550 | Psi - 116000 , MPa - 800 | 15 % |
STANDARD | UNS | WERKSTOFF NR. |
Duplex S31803 | S31803 | 1.4462 |
Ultimate Tensile Strength, ksi Minimum
|
.2% Yield Strength, ksi Minimum
|
Hardness Max.
|
---|---|---|
95
|
65
|
31 Rockwell C
|
Grade |
Density |
Elastic (GPa) |
Mean Co-eff of Thermal |
Thermal |
Specific ( J/kg.K) |
Electrical |
|||
0-100°C |
0-315°C |
0-538°C |
at 100°C |
at 500°C |
|||||
2205 |
782 |
190 |
13.7 |
14.2 |
- |
19 |
- |
418 |
850 |
Thickness | Plate Weight per Unit Area | Density |
---|---|---|
3/16 inches | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/4 inches | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/8 inches | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/2 inches | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
5/8 inches | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/4 inches | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
7/8 inches | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 inches | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/4 inches | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/2 inches | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 3/4 inches | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 inches | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/4 inches | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/2 inches | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 3/4 inches | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3 inches | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
Size (in inches)
|
Size (in mm)
|
---|---|
.125"
|
3.18mm
|
.134"
|
3.40mm
|
.156"
|
3.96mm
|
.187"
|
4.75mm
|
.250"
|
6.35mm
|
.312"
|
7.92mm
|
.375"
|
9.53mm
|
.500"
|
12.7mm
|
.625"
|
15.9mm
|
.750"
|
19.1mm
|
.875"
|
22.2mm
|
1"
|
25.4mm
|
1.125"
|
28.6mm
|
1.250"
|
31.8mm
|
1.500"
|
38.1mm
|
1.750"
|
44.5mm
|
2"
|
50.8mm
|
2.500"
|
63.5mm
|
3"
|
76.2mm
|
Metric Dimensions
Surface finish | Thickness (mm) | Width (mm) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed | 0.25–8.0 | max. 2032 |
2D – Cold rolled, heat treated, pickled | 0.4–6.35 | max. 1524 |
2E – Cold rolled, heat treated, mechanically descaled | 0.4–8.0 | max. 2032 |
2R – Cold rolled, bright annealed | 0.25–3.5 | max. 1524 |
2H – Work hardened | 0.4–6.35 | max. 1524 |
Polished, brushed | 0.5–4.0 | max. 1524 |
Imperial Dimensions
Surface finish | Gauge (in) | Width (in) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed | 10–24 | max. 72* |
2D – Cold rolled, heat treated, pickled | 12–24 | max. 60 |
BA Mexinox only | 18–28 | max. 48 |
Polished (not brushed) | 11–24 | max. 60 |
Temper rolled Mexinox only | 13–29 | max. 48 |
2205 Duplex stainless steel coil | Malaysia, Colombia, China, Sweden |
6mm duplex stainless steel sheet 2205 | Malaysia, Europe, UAE, United Kingdom -UK |
2205 duplex stainless steel sheet 2B finish | Thailand, Germany, Malaysia, Czechia |
DIN 1.4462 Duplex 2205 Hot Rolled 10mm Plate | Poland, Canada, Ellington -United States, UK |
2205 Duplex 28 Gauge Sheet For Kitchen Wall | Iran, Italy, Singapore, Chile |
3mm - 300mm Duplex Stainless Steel Sheet | Europe, France, Thailand, Qatar |
2205 duplex steel plate 8mm | Hong Kong, Malaysia, UAE, Oman |
Plate 2205 Surface Finish NO.1 | Philippines, Indonesia, Belgium, Dammam -KSA |
2205 duplex prime quality cold rolled stainless steel sheet | Romania, Japan, Malaysia, Europe |
duplex 2205 25mm thick stainless steel plate/sheet | NY 12203 (USA), South Korea, Malaysia, Singapore |
ASME SA 240 UNS S32205 Sheet | Kuwait, Saudi Arabia (KSA), Brazil, South Africa |
1.2mm thickness 2B surface 2205 duplex Stainless Steel sheet | Bangladesh, USA, Finland, Malaysia |
Supercold Mirror 2205 Duplex Plate | Canada, Malaysia, Singapore, Philippines |
0.3mm Thick Duplex Stainless Steel Sheet | Singapore, South Africa, Singapore, Bahrain |
Uns S32205 Sheet 1.5*980mm | Russia, Malaysia, Dubai, Netherlands |
duplex 2205 plate 2B BA No.8 surface | Norway, Turkey, Malaysia, United Arab Emirates (UAE) |
Stainless Steel Hot Rolled Sheets Grade Duplex 2205 (Size:10.00 Mm X 1500 Mm X 6000 Mm | UK, Australia, Nigeria, Philippines |
Duplex Stainless Steel Hot Rolled Sheet Grade 2205 Width 1500 Mm Thk 10 Mm | Los Alamos -Mexico, Taiwan, Philippines, Malaysia |
hot rolled 2mm 2205 duplex SS sheet | Mexico, Spain, UK, Egypt |