Alloy 2507 is prepared by using 25% of chromium, 4% of molybdenum, and 7% of nickel. Super Duplex 2507 Flanges have a strong yield strength, which helps them withstand pressures at high temperatures. These flanges are highly resistant to corrosion along with pitting by acids and crevice corrosion. Along with this, the alloy has good mechanical and welding properties. These fittings are used in petrochemical, heat exchangers, cargo tanks, oil, gas, water desalinization, and related industries. We are one of the top super duplex flanges manufacturer in the country, who focuses on creating high-quality products at the most reasonable prices.
The UNS S32507 Slip on Flanges are cost-effective flanges. These flanges can be slid on seamless pipes and put in place by turning these pipes. The Stainless Steel Grade 2507 Weld Neck Flange is installed by butt-welding the fitting. This flange has a hub, which allows it to support the other pipes in heavy-duty applications. Stainless Steel 2507 Forged Flanges is another heavy-duty flange, which provides support to different parts of the piping system. Our experienced workers use the best raw materials and the latest technology to produce the best products.
The ANSI B16.5 Super Duplex UNS S32760 Blind Flange doesn’t possess a hub and is a circular blank disc. This disc is used to seal or isolate a part of the piping system. SAF 2507 Plate Flanges is a flat or circular disk that is welded on the end of a pipe, which allows it, be bolted to another pipe. If you have any queries regarding our super duplex steel flanges or their pricing, contact us for more information.
Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
---|---|
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
UNI | 6Bar 10Bar 25Bar 16Bar 40Bar |
EN | 25Bar 6Bar 10Bar 16Bar 40Bar |
Connect Type/ Flange Face Type | Ring Type Joint (RTJ), Raised Face (RF), Lap-Joint Face (LJF), Small Male-Female (SMF), Flat Face (FF), Large Male-Female (LMF), Small Tongue, Large Tongue & Groove, Groove |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Coating | Zinc Plated,Oil Black Paint, Cold and Hot Dip Galvanized, Anti-rust Paint, Yellow Transparent |
Most common types | Threaded / Screwed / Forged / Plate |
Uses & application |
|
Pressure Rating ANSI | 600 LBS, 900 LBS, 150 LBS, 2500 LBS, 300 LBS, 1500 LBS |
Pressure Calculation in DIN | 16Bar 6Bar 25Bar 40Bar 10Bar / PN10 PN16 PN6 PN25 PN64 PN40 |
Equipment | Pushing Machine, Press machine, electric bevelling machine, Bending machine, Sand-blasting machine etc |
Origin | West Europe / Japan / Indian / USA / Korean |
Special design |
As per your drawing AS, ANSI, BS, DIN and JIS |
Test | Direct-reading Spectrograph, UI trasonic flaw detector, Hydrostatic testing machine, X-ray detector, Magnetic particle detector |
Standards | API605, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, ASME Flanges, API7S-15, API7S-43, BS Flanges, DIN Flanges, EN Flanges, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, EN1092 |
Export to | Dubai, Singapore, Indonesia, Ukraine, Korea, Iran, India, Saudi Arabia, Thailand, Egypt, Oman, Spain, Canada, USA, Ireland, Brazil, Peru, etc |
Super Duplex 2507 Flanges Price in India | UNS S32507 Flanges Price in INR | Super Duplex 2507 Flanges Price in USD | Stainless Steel Grade 2507 Flanges Price in UAE Dirham |
1/2" - 96" 3" Series A Super Duplex 2507 Plate Flange | Rs. 749.31 | 10.00 USD | UAE Dirham 36.73 |
C | N | P | Si | Mn | Mo | Ni | Cr | S | Other |
0.030 | 0.24/0.32 | 0.035 | 0.80 | 1.20 | 3.0/5.0 | 6.00/8.00 | 24.0/26.0 | 0.020 | Cu:0.50 |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
7.8 g/cm3 | 1350 °C (2460 °F) | Psi - 80000 , MPa - 550 | Psi - 116000 , MPa - 800 | 15 % |
STANDARD | UNS | WERKSTOFF NR. |
Super Duplex S32750 | S32750 | 1.4410 |
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
AS 2129 | Table C | 95 | 67 | 4 | 13 | 14 |
Table D | 95 | 67 | 4 | 13 | 14 | |
Table E | 95 | 67 | 4 | 13 | 14 | |
Table F | 95 | 67 | 4 | 13 | 14 | |
Table H | 114 | 83 | 4 | 16 | 17 | |
Table J | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) | PN6 | 80 | 55 | 4 | M10 | 11 |
PN10 | 95 | 65 | 4 | M12 | 14 | |
PN16 | 95 | 65 | 4 | M12 | 14 | |
PN20 | 90 | 60.5 | 4 | M14 | 16 | |
PN25 | 95 | 65 | 4 | M12 | 14 | |
PN40 | 95 | 65 | 4 | M12 | 14 |
Nominal Size |
Outside Diameter (OD) |
Min. Thickness (T) |
RF Dia. (R) |
No. of Bolt Holes | Diameter of Holes |
Bolt Circle (BC) |
SO Bore ID (SB) |
WN Bore ID (WB) |
Dia. Hub Base (HB) |
Dia. of Hub Top (HT) |
SO LTH (SL) |
WN LTH (WL) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1⁄2 | 3.50 | 0.38 | 1.38 | 4 | 0.62 | 2.38 | 0.88 | 0.62 | 1.19 | 0.84 | 0.56 | 1.81 |
3⁄4 | 3.88 | 0.44 | 1.69 | 4 | 0.62 | 2.75 | 1.09 | 0.82 | 1.50 | 1.05 | 0.56 | 2.00 |
1 | 4.25 | 0.50 | 2.00 | 4 | 0.62 | 3.12 | 1.36 | 1.05 | 1.94 | 1.32 | 0.62 | 2.12 |
11⁄4 | 4.62 | 0.56 | 2.50 | 4 | 0.62 | 3.50 | 1.70 | 1.38 | 2.31 | 1.66 | 0.75 | 2.19 |
11⁄2 | 5.00 | 0.62 | 2.88 | 4 | 0.62 | 3.88 | 1.95 | 1.61 | 2.56 | 1.90 | 0.81 | 2.38 |
2 | 6.00 | 0.69 | 3.62 | 4 | 0.75 | 4.75 | 2.44 | 2.07 | 3.06 | 2.38 | 0.94 | 2.44 |
21⁄2 | 7.00 | 0.81 | 4.12 | 4 | 0.75 | 5.50 | 2.94 | 2.47 | 3.56 | 2.88 | 1.06 | 2.69 |
3 | 7.50 | 0.88 | 5.00 | 4 | 0.75 | 6.00 | 3.57 | 3.07 | 4.25 | 3.50 | 1.12 | 2.69 |
31⁄2 | 8.50 | 0.88 | 5.50 | 8 | 0.75 | 7.00 | 4.07 | 3.55 | 4.81 | 4.00 | 1.19 | 2.75 |
4 | 9.00 | 0.88 | 6.19 | 8 | 0.75 | 7.50 | 4.57 | 4.03 | 5.31 | 4.50 | 1.25 | 2.94 |
5 | 10.00 | 0.88 | 7.31 | 8 | 0.88 | 8.50 | 5.66 | 5.05 | 6.44 | 5.56 | 1.38 | 3.44 |
6 | 11.00 | 0.94 | 8.50 | 8 | 0.88 | 9.50 | 6.72 | 6.07 | 7.56 | 6.63 | 1.50 | 3.44 |
8 | 13.50 | 1.06 | 10.62 | 8 | 0.88 | 11.75 | 8.72 | 7.98 | 9.69 | 8.63 | 1.69 | 3.94 |
10 | 16.00 | 1.12 | 12.75 | 12 | 1.00 | 14.25 | 10.88 | 10.02 | 12.00 | 10.75 | 1.88 | 3.94 |
12 | 19.00 | 1.19 | 15.00 | 12 | 1.00 | 17.00 | 12.88 | 12.00 | 14.38 | 12.75 | 2.12 | 4.44 |
14 | 21.00 | 1.31 | 16.25 | 12 | 1.12 | 18.75 | 14.14 | 13.25 | 15.75 | 14.00 | 2.19 | 4.94 |
16 | 23.50 | 1.38 | 18.50 | 16 | 1.12 | 21.25 | 16.16 | 15.25 | 18.00 | 16.00 | 2.44 | 4.94 |
18 | 25.00 | 1.50 | 21.00 | 16 | 1.25 | 22.75 | 18.18 | 17.25 | 19.88 | 18.00 | 2.62 | 5.44 |
20 | 27.50 | 1.62 | 23.00 | 20 | 1.25 | 25.00 | 20.20 | 19.25 | 22.00 | 20.00 | 2.81 | 5.62 |
22 | 29.50 | 1.75 | 25.25 | 20 | 1.38 | 27.25 | 22.22 | 21.25 | 24.25 | 22.00 | 3.07 | 5.82 |
24 | 32.00 | 1.81 | 27.25 | 20 | 1.38 | 29.50 | 24.25 | 23.25 | 26.12 | 24.00 | 3.19 | 5.94 |
Temp. ℃ | Pressure-temperature rating for ASME B16.47 by class, bar | |||||
75 | 150 | 300 | 400 | 600 | 900 | |
-29 to 38 | 10.0 | 20.0 | 51.7 | 68.9 | 103.4 | 155.1 |
50 | 9.8 | 19.5 | 51.7 | 68.9 | 103.4 | 155.1 |
100 | 8.8 | 17.7 | 50.7 | 67.5 | 101.3 | 152.0 |
150 | 7.9 | 15.8 | 45.9 | 61.2 | 91.9 | 137.8 |
200 | 6.9 | 13.8 | 42.7 | 56.9 | 85.3 | 128.0 |
250 | 6.0 | 12.1 | 40.5 | 53.9 | 80.9 | 121.4 |
300 | 5.1 | 10.2 | 38.9 | 51.8 | 77.7 | 116.6 |
1/2" - 96" Stainless Steel 2507 Plate Flange | South Korea, Singapore, NY 12203 (USA), Malaysia |
super duplex blind flanges 12 inch class 600 | Italy, Chile, Iran, Singapore |
EN1092-1 Super Duplex F53 SS Flange | France, Qatar, Europe, Thailand |
Super Duplex Stainless Steel Flange 2507 12'' x 2'' 150 LB | Australia, Philippines, UK, Nigeria |
150# SCH 10S 12inch super Duplex 2507 forged Flange | USA, Malaysia, Bangladesh, Finland |
Forged WELDOFLANGE Super Duplex Stainless Steel 2'' x 1-1/4'' 150LB SCH40s | Turkey, United Arab Emirates (UAE), Norway, Malaysia |
ASTM A182 F53 UNS S32750 Slip On Flange | Malaysia, Netherlands, Russia, Dubai |
ANSI B16.5 Super Duplex 2507 Forged Steel Pipe Flange | Taiwan, Malaysia, Los Alamos -Mexico, Philippines |
2507 Stainless Steel ansi b16.5 class 150 welding neck flange | Malaysia, Philippines, Canada, Singapore |
2507 Stainless Steel weld neck flange | Germany, Czechia, Thailand, Malaysia |
ANSI B16.5 Super Duplex 2507 THREADED FLANGES | South Africa, Bahrain, Singapore, Singapore |
ASME b16.5 forged blind large diameter Stainless 2507 flange | Europe, United Kingdom -UK, Malaysia, UAE |
ASME SA182 Super Duplex S32950 RTJ Flange | Saudi Arabia (KSA), South Africa, Kuwait, Brazil |
SAF 2507 Super Duplex SS Forged Socket Weld Pipe Flange | Indonesia, Dammam -KSA, Philippines, Belgium |
DIN 1.4410 PN10 Forged Flanges | Spain, Egypt, Mexico, UK |
Class 150 RF Super Duplex Stainless Steel ANSI Weld Neck Flange | Canada, UK, Poland, Ellington -United States |
Super Duplex 2507 rtj 24 inch flange | Colombia, Sweden, Malaysia, China |
SCH160 SUPER DUPLEX STAINLESS FLAT FACE FLANGE | Japan, Europe, Romania, Malaysia |
ASME B16.5 ASTM A182 F53 S32750 FLANGE SIZE 3/4" CLASS150 | Malaysia, Oman, Hong Kong, UAE |