Monel 400 is made up of nickel and copper along with trace elements comprising of iron, manganese, carbon, and silicon. Monel 400 Fittings has excellent resistance against acids and alkalis thereby, being extremely corrosion resistant. Along with this, it has good tensile strength, thermal conductivity, and has elongation properties. After hardening these fittings with cold-working they are suitable to work at temperatures from sub-zero to 538°C. These fittings are commonly found in valves, pumps, heat exchangers, marine engineering, chemical, and hydrocarbon processing units. We are the leading manufacturers and suppliers of Monel 400 Fittings. We consider it our moral obligation to produce high-quality products at reasonable rates.
The Alloy 400 Reducer fitting changes the pipe size from a large bore to a small one. The hydraulic flow reduction in the system helps the pipe in adapting to different sizes of pipes. These pipe reducers can be either concentric or eccentric. The DIN 2.4360 Tee is used to connect 3 pipes in a junction. This tee can be used to deal with any low weight or high weight fluid or gases flowing through it. UNS N04400 Stub End is used to create a joint amongst two pipes having backing rings, a fastener set, and a stub gasket. Our experienced staff uses the latest technology while using the best raw materials to produce the best products.
The ASTM B366 UNS N04400 Buttweld Elbow is fitted between two pipes or tubes, which, helps to change the direction of flow of that pipe or tube. These elbows come as either short-radius elbows or long-radius elbows. The ASTM B366 UNS N04400 Long Radius Elbow is the most commonly used elbow amongst the two. If you want to know more about our products or pricing, contact us.
size | Seamless Butt Weld Fittings: 1/2" - 10" Welded Butt Weld Fittings: 1/2" - 48" |
---|---|
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A403 Stainless Steel Buttweld Fitting |
Dimensions | ASME B16.28, MSS-SP-43, ASME/ANSI B16.9, BS4504, BS4504, BS1560, BS10 |
Type | DN15-DN1200 |
Connection | Welding |
Manufacturing process | Push, Press, Forge, Cast, etc. |
Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom MSS Sp-43 |
Elbows | Angle : 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D . Standard: ASME B16.9, ASME B16.28, ASME B16.25, 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, MSS SP-75 JISB2312 JISB2313, DIN2605 JISB2311 BS, GB, ISO |
Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Crosses, Reducers, Pipe Cap, Stub End, Pipe Bend |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Export to | Dubai, Iran, Spain, Canada, Ireland, Brazil, Thailand, Egypt, Saudi Arabia, Singapore, Indonesia, Ukraine, Korea, Oman, India, USA, Peru, etc |
Key markets and industries |
|
Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Monel 400 Fittings Price in India | Alloy 400 Buttweld Fittings Price in INR | ASTM B366 UNS N04400 pipe fittings Price in USD | Alloy 400 Buttweld Fittings Price in UAE Dirham |
ELBOW 12 90 DEG, WELDED ASTM B366, UNS N04400 (MONEL 400 PIPE FITTINGS) | Rs. 385,081 | 5139.18 USD | UAE Dirham 18877.22 |
REDUCING TEE SCH 40 BW ASTM B 366 GR WPNC S MONEL ALLOY 400 | Rs. 100,748 | 1344.55 USD | UAE Dirham 4938.81 |
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Nominal Pipe Size |
Outside Diameter |
90° Elbows | 45° Elbows | 180° Returns | ||||
---|---|---|---|---|---|---|---|---|
(inches) | Long Radius | Short Radius | Long Radius | Long Radius | ||||
(mm) | (inches) | Center to Face (inches) |
Center to Face (inches) |
Center to Face (inches) |
Radius (inches) |
Center to Center (inches) |
Back to face (inches) |
|
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
Nominal Pipe Size |
Outside Diameter |
Reducers | ||
---|---|---|---|---|
Reduced from
(inches) |
(mm)
|
(inches)
|
Reduced to
(inches) |
Concentric & Eccentric Length
(inches) |
1/2
|
21.3
|
0.840
|
1/4
|
1 1/2
|
3/8
|
1 1/2
|
|||
3/4
|
26.7
|
1.050
|
3/8
|
2
|
1/2
|
2
|
|||
1
|
33.4
|
1.315
|
3/8
|
2
|
1/2
|
2
|
|||
3/4
|
2
|
|||
1 1/4
|
42.2
|
1.660
|
1/2
|
2
|
3/4
|
2
|
|||
1
|
2
|
|||
1 1/2
|
48.3
|
1.900
|
1/2
|
2 1/2
|
3/4
|
2 1/2
|
|||
1
|
2 1/2
|
|||
1 1/4
|
2 1/2
|
|||
2
|
60.3
|
2.375
|
3/4
|
3
|
1
|
3
|
|||
1 1/4
|
3
|
|||
1 1/2
|
3
|
|||
2 1/2
|
73.0
|
2.875
|
1
|
3 1/2
|
1 1/4
|
3 1/2
|
|||
1 1/2
|
3 1/2
|
|||
2
|
3 1/2
|
|||
3
|
88.9
|
3.500
|
1
|
3 1/2
|
1 1/2
|
3 1/2
|
|||
2
|
3 1/2
|
|||
2 1/2
|
3 1/2
|
|||
3 1/2
|
101.6
|
4.000
|
1 1/4
|
4
|
1 1/2
|
4
|
|||
2
|
4
|
|||
2 1/2
|
4
|
|||
3
|
4
|
|||
4
|
114.3
|
4.500
|
1 1/2
|
4
|
2
|
4
|
|||
2 1/2
|
4
|
|||
3
|
4
|
|||
3 1/2
|
4
|
|||
5
|
141.3
|
5.563
|
2
|
5
|
2 1/2
|
5
|
|||
3
|
5
|
|||
3 1/2
|
5
|
|||
4
|
5
|
|||
6
|
168.3
|
6.625
|
2 1/2
|
5 1/2
|
3
|
5 1/2
|
|||
3 1/2
|
5 1/2
|
|||
4
|
5 1/2
|
|||
5
|
5 1/2
|
|||
8
|
219.1
|
8.625
|
3
|
6
|
3 1/2
|
6
|
|||
4
|
6
|
|||
5
|
6
|
|||
6
|
6
|
|||
10
|
273.1
|
10.750
|
4
|
7
|
5
|
7
|
|||
6
|
7
|
|||
8
|
7
|
|||
12
|
323.9
|
12.750
|
5
|
8
|
6
|
8
|
|||
8
|
8
|
|||
10
|
8
|
Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inches)
|
(mm)
|
(inches)
|
Length
(inches) |
Center to End
(inches) |
Center to End
(inches) |
Lap Diameter
(inches) |
Long Length
(inches) |
Short Length
(inches) |
1/2
|
21.3
|
0.840
|
1
|
1
|
–
|
1 3/8
|
3
|
2
|
3/4
|
26.7
|
1.050
|
1
|
1 1/8
|
–
|
1 11/16
|
3
|
2
|
1
|
33.4
|
1.315
|
1 1/2
|
1 1/2
|
1 1/2
|
2
|
4
|
2
|
1 1/4
|
42.2
|
1.660
|
1 1/2
|
1 7/8
|
1 7/8
|
2 1/2
|
4
|
2
|
1 1/2
|
48.3
|
1.900
|
1 1/2
|
2 1/4
|
2 1/4
|
2 7/8
|
4
|
2
|
2
|
60.3
|
2.375
|
1 1/2
|
2 1/2
|
2 1/2
|
3 5/8
|
6
|
2 1/2
|
2 1/2
|
73.0
|
2.875
|
1 1/2
|
3
|
3
|
4 1/8
|
6
|
2 1/2
|
3
|
88.9
|
3.500
|
2
|
3 3/8
|
3 3/8
|
5
|
6
|
2 1/2
|
3 1/2
|
101.6
|
4.000
|
2 1/2
|
3 3/4
|
3 3/4
|
5 1/2
|
6
|
3
|
4
|
114.3
|
4.500
|
2 1/2
|
4 1/8
|
4 1/8
|
6 3/16
|
6
|
3
|
5
|
141.3
|
5.563
|
3
|
4 7/8
|
4 7/8
|
7 5/16
|
8
|
3
|
6
|
168.3
|
6.625
|
3 1/2
|
5 5/8
|
5 5/8
|
8 1/2
|
8
|
3 1/2
|
8
|
219.1
|
8.625
|
4
|
7
|
7
|
10 5/8
|
8
|
4
|
10
|
273.1
|
10.750
|
5
|
8 1/2
|
8 1/2
|
12 3/4
|
10
|
5
|
12
|
323.9
|
12.750
|
6
|
10
|
10
|
15
|
10
|
6
|
Product range and theoretical weights (kg) |
|||||||||
DN |
Schedule 10S |
Schedule 40S |
Schedule 80S |
||||||
900 Elbow |
450 Elbow |
Equal tee |
900 Elbow |
450 Elbow |
Equal tee |
900 Elbow |
450 Elbow |
Equal tee |
|
8 |
0.02 |
0.01 |
0.03 |
0.03 |
0.02 |
0.06 |
0.04 |
0.03 |
0.07 |
10 |
0.03 |
0.02 |
0.05 |
0.03 |
0.02 |
0.03 |
0.06 |
0.04 |
0.09 |
15 |
0.06 |
0.03 |
0.09 |
0.08 |
0.04 |
0.10 |
0.10 |
0.05 |
0.14 |
20 |
0.07 |
0.03 |
0.13 |
0.08 |
0.04 |
0.17 |
0.11 |
0.05 |
0.20 |
25 |
0.14 |
0.08 |
0.28 |
0.15 |
0.11 |
0.29 |
0.22 |
0.14 |
0.38 |
32 |
0.23 |
0.11 |
0.49 |
0.26 |
0.17 |
0.59 |
0.40 |
0.23 |
0.68 |
40 |
0.30 |
0.17 |
0.68 |
0.40 |
0.23 |
0.86 |
0.51 |
0.29 |
1.02 |
50 |
0.50 |
0.25 |
0.85 |
0.70 |
0.4 |
1.28 |
0.91 |
0.59 |
1.59 |
65 |
0.85 |
0.48 |
1.41 |
1.40 |
0.77 |
2.19 |
1.81 |
0.99 |
3.13 |
80 |
1.25 |
0.63 |
1.77 |
2.20 |
1.08 |
3.31 |
2.97 |
1.50 |
4.45 |
90 |
1.70 |
0.75 |
2.67 |
2.83 |
1.42 |
4.08 |
4.00 |
2.00 |
5.44 |
100 |
2.10 |
1.08 |
3.46 |
4.47 |
2.09 |
5.27 |
6.18 |
2.81 |
7.71 |
150 |
5.45 |
2.72 |
8.07 |
10.89 |
5.44 |
10.99 |
16.32 |
8.16 |
13.61 |
200 |
10.20 |
5.33 |
15.65 |
21.54 |
10.77 |
20.91 |
33.11 |
16.56 |
28.12 |
250 |
18.15 |
9.75 |
26.46 |
38.56 |
19.27 |
35.38 |
51.71 |
25.86 |
49.90 |
300 |
25.80 |
13.62 |
39.46 |
59.42 |
29.71 |
62.14 |
79.38 |
39.69 |
83.91 |
Ansi B16.9 UNS N04400 Reducing Elbow And Reducer | UK, Saudi Arabia (KSA), Brazil, Spain |
400 Monel 12″ TYPE 3 90 degree elbow | UAE, South Africa, Singapore, Europe |
ASME SB366 400 Monel 1/8″ Tee | Malaysia, Mexico, Egypt, Los Alamos -Mexico |
ANSI B16.9 Monel Alloy 400 Straight Tees | Dubai, USA, Finland, Malaysia |
Monel 90d Elbow | Ellington -United States, Australia, Nigeria, Canada |
Butt welding ASTM B16.9 B366 Monel concentric reducer | Qatar, Malaysia, Singapore, Europe |
Monel 400 3” x 2” SCH40S Concentric Reducer | Philippines, Indonesia, Belgium, UK |
Monel DIN 2.4360 Stub End | Oman, France, Thailand, Hong Kong |
Monel 400 schedule 40 steel pipe fitting | Singapore, Malaysia, United Kingdom -UK, NY 12203 (USA) |
ASTM B366 400 Monel 1-1/2″ 45″ Elbow | South Africa, Taiwan, Philippines, Kuwait |
SCH 80 ASTM B366 UNS N04400 8″ 90 degree long radius elbow | Sweden, Russia, Netherlands, Malaysia |
Alloy 400 Welded And Seamless Pipe Fittings | Malaysia, Colombia, China, Bangladesh |
Monel 400 90 Degree Elbow Seamless | Czechia, Japan, Malaysia, Jakarta, Thailand |
BW 45D LR Elbow Monel 400 3'' STD ASME B16.9 | Bahrain, South Korea, Malaysia, Singapore |
Concentric Reducer 4" X 2" Sch80 Monel 400 | Europe, Norway, United Arab Emirates (UAE), Romania |
90D LR Elbow Monel 400 4'' sch60 ASME B16.9 | Singapore, Malaysia, UAE, Italy |
Monel 400 WPNC Cap Fittings | Malaysia, Germany, Malaysia, Turkey |
UNS N04400 Monel 400 Sanitary Equal Tee | Dammam -KSA, Poland, UK, Philippines |
Monel 90 deg BW 3" sch 80 Monel seamless elbow | Philippines, Iran, Chile, Canada |