AISI 304LN Tube is made up of the 304LN grade which can fall under the ASTM 312, ASTM A358 standards. The pipes range from ½ inches to 16 inches in outer diameters for seamless pipes, up to 24 inches for ERW pipes and from 6 inches to 100 inches for EFW pipes. The Stainless Steel 304 Pipe has more precision in dimension where the other types have higher diameters. These pipes are specialized in larger diameter pipes. They are used for oil and gas conveying in long tunnels. The Stainless Steel 304 Tube can come in different wall thicknesses and schedules. The schedules can range from sch20 through sch160 and XXS. The pipe form can vary as round, square, rectangular or hydraulic. The pipe length varies from single random, double random to custom cut to length sizes.
The DIN 1.4301 Welded Pipe is easy to weld with. It does not require pre heating or post weld heat treatment after welding. The pipe ends can vary as plain end, beveled end and threaded end types. Depending on the application and other grades used in the application, these pipe end types vary. The material includes carbon, manganese, silicon, sulfur, phosphorus, chromium and nickel in the composition. the AISI 304ln DOM Tubing can be used in oil and gas, petroleum, petrochemical, general engineering and other applications. This is also one of the most used grades of stainless steel in the world.
ASTM / ASME Standards |
|
---|---|
Pipe Form | Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipes Etc. |
Pipe/ Tube Length | Single Random, Double Random & Cut Length. |
Pipe/ Tube Schedule | SCH5, SCH10, SCH40, STD, SCH80, SCH160 |
Pipe Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
EFW Pipe size | 5.0 mm - 1219.2 mm |
End | Plain End, Beveled End, Treaded. |
Welded Tube Size | 6.35 mm OD To 152 mm OD |
Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
Marking | All Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 |
Tubing wall thickness | 0.020" –0.220", (special wall thicknesses available) |
Tube Length | Single Random, Double Random, Standard & Cut length |
End | Plain End, Beveled End, Treaded |
Marking | All tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
Tube Type | Seamless, ERW, EFW, Welded, Fabricated |
Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
Tube Form | Round, Coil, Square, Rectangular, Boiler, Hydraulic, Straight or ‘U’ bent Tubes, Hollow, LSAW Tubes Etc. |
Application | Oil Tube, Gas Tube, Fluid Tube, Boiler and Heat exchanger |
Price list of Stainless Steel 304 Pipe in | SS 304 Pipes Price in India (INR) | SS 304 Pipes Price in USD | SS 304 Pipes Price in UAE Dirham |
---|---|---|---|
ASTM A 312 GRADE TP304 SIZE(48.26MM OD X 2.60MM THK X 6000M LENGTH |
INR 166 | 2.21 USD | 8.13 UAE Dirham |
ASTM A 312 GRADE TP304 SIZE(168.30MM OD X 6.70MM THK X 6000M LENGTH |
INR 173 | 2.31 USD | 8.48 UAE Dirham |
For more Stainless Steel 304 Pipe price click here
PIPE SIZE | OD IN INCHES | A.S.A. Pipe Schedules | |||||||||||
5s | 5 | 10s | 10 | 40s & Std. | 40 | 60 | 80s & E.H. | 80 | 120 | 160 | DBL E.H. | ||
1/8 | .405 | .035.1383 | .049.1863 | .049.1863 | .068.2447 | 068.2447 | 0.95.3145 | 0.95.3145 | |||||
1/4 | .540 | .049.2570 | .065.3297 | .065.3297 | .088.4248 | 088.4248 | .119.5351 | .119.5351 | |||||
3/8 | .675 | .049.3276 | .065.4235 | .065.4235 | .091.5676 | .091.5676 | .126.7338 | .126.7338 | |||||
1/2 | .840 | .065.5383 | .065.5383 | .083.6710 | .083.6710 | .109.8510 | .109.8510 | .1471.088 | .1471.088 | .1871.304 | .2941.714 | ||
3/4 | 1.050 | .065.6838 | .065.6838 | .083.8572 | .083.8572 | .1131.131 | .1131.131 | .1541.474 | .1541.474 | .2181.937 | .3082.441 | ||
1 | 1.315 | .065.8678 | .065.8678 | .1091.404 | .1091.404 | .1331.679 | .1331.679 | .1792.172 | .1792.172 | .2502.844 | .3583.659 | ||
1-1/4 | 1.660 | .0651.107 | .0651.107 | .1091.806 | .1091.806 | .1402.273 | .1402.273 | .1912.997 | .1912.997 | .2503.765 | .3825.214 | ||
1-1/2 | 1.900 | .0651.274 | .0651.274 | .1092.085 | .1092.085 | .1452.718 | .1452.718 | .2003.631 | .2003.631 | .2814.859 | .4006.408 | ||
2 | 2.375 | .0651.604 | .0651.604 | .1092.638 | .1092.638 | .1543.653 | .1543.653 | .2185.022 | .2185.022 | .3437.444 | .4369.029 | ||
2-1/2 | 2.875 | .0832.475 | .0832.475 | .1203.531 | .1203.531 | .2035.793 | .2035.793 | .2767.661 | .2767.661 | .37510.01 | .55213.70 | ||
3 | 3.500 | .0833.029 | .0833.029 | .1204.332 | .1204.332 | .2167.576 | .2167.576 | .30010.25 | .30010.25 | .43714.32 | .60018.58 | ||
3-1/2 | 4.000 | .0833.472 | .0833.472 | .1204.973 | .1204.973 | .2269.109 | .2269.109 | .31812.51 | .31812.51 | .63622.85 | |||
4 | 4.500 | .0833.915 | .0833.915 | .1205.613 | .1205.613 | .23710.79 | .23710.79 | .28112.66 | .33714.98 | .33714.98 | .43719.01 | .53122.51 | .67427.54 |
4-1/2 | 5.000 | .24712.53 | .35517.61 | .71032.53 | |||||||||
5 | 5.563 | .1096.349 | .1096.349 | .1347.770 | .1347.770 | .25814.62 | .25814.62 | .37520.78 | .37520.78 | .50027.04 | .62532.96 | .75038.55 | |
6 | 6.625 | .1097.585 | .1097.585 | .1349.290 | .1349.290 | .28018.97 | .28018.97 | .43228.57 | .43228.57 | .56236.39 | .71845.30 | .86453.16 | |
7 | 7.625 | .30123.57 | .50038.05 | .87563.08 | |||||||||
Medium Type = Wall thickness in inches Bold Type = Steel weight per foot in pounds |
PIPE SCHEDULES WALL THICKNESS (Inches)
|
||||||||
---|---|---|---|---|---|---|---|---|
Nominal
|
O.D. Inches
|
10s
|
10
|
40s & Std
|
40
|
80s & E.H.
|
80
|
160
|
1/8
|
.405
|
.049
|
.049
|
.068
|
.068
|
.095
|
.095
|
|
1/4
|
.540
|
.065
|
.065
|
.088
|
.088
|
.119
|
.119
|
|
3/8
|
.675
|
.065
|
.065
|
.091
|
.091
|
.126
|
.126
|
|
1/2
|
.840
|
.083
|
.083
|
.109
|
.109
|
.147
|
.147
|
.187
|
3/4
|
1.050
|
.083
|
.083
|
.113
|
.113
|
.154
|
.154
|
.218
|
1
|
1.315
|
.109
|
.109
|
.133
|
.133
|
.179
|
.179
|
.250
|
1 1/4
|
1.660
|
.109
|
.109
|
.140
|
.140
|
.191
|
.191
|
.250
|
1 1/2
|
1.900
|
.109
|
.109
|
.145
|
.145
|
.200
|
.200
|
.281
|
2
|
2.375
|
.109
|
.109
|
.154
|
.154
|
.218
|
.218
|
.343
|
2 1/2
|
2.875
|
.120
|
.120
|
.203
|
.203
|
.276
|
.276
|
.375
|
3
|
3.500
|
.120
|
.120
|
.216
|
.216
|
.300
|
.300
|
.437
|
3 1/2
|
4.000
|
.120
|
.120
|
.226
|
.226
|
.318
|
.318
|
|
4
|
4.500
|
.120
|
.120
|
.237
|
.237
|
.337
|
.337
|
.531
|
4 1/2
|
5.000
|
.247
|
.355
|
|||||
5
|
5.563
|
.134
|
.134
|
.258
|
.258
|
.375
|
.375
|
.625
|
6
|
6.625
|
.134
|
.134
|
.280
|
.280
|
.432
|
.432
|
.718
|
7
|
7.625
|
.301
|
.500
|
|||||
8
|
8.625
|
.148
|
.148
|
.322
|
.322
|
.500
|
.500
|
.906
|
9
|
9.625
|
.342
|
.500
|
|||||
10
|
10.750
|
.165
|
.165
|
.365
|
.365
|
.500
|
.593
|
1.125
|
11
|
11.750
|
.375
|
.500
|
|||||
12
|
12.750
|
.180
|
.180
|
.375
|
.406
|
.500
|
.687
|
1.312
|
14
|
14.000
|
.188
|
.250
|
.375
|
.437
|
.500
|
.750
|
1.406
|
16
|
16.000
|
.188
|
.250
|
.375
|
.500
|
.500
|
.843
|
1.593
|
18
|
18.000
|
.188
|
.250
|
.375
|
.562
|
.500
|
.937
|
1.781
|
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 11 | – |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
Wall | Sizes ( O.D.) |
---|---|
.010 | 1/16" , 1/8" , 3/16" |
.020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
.012 | 1/8" |
.016 | 1/8" , 3/16" |
.028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
.035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
.083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
.095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
.109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
.120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
.125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
.134 | 1" |
.250 | 3" |
.375 | 3 1/2" |
OD inches | Ave. Wall inches | Min Yield Strength (PSI) | Min Tensile Strength (PSI) | Theoretical Burst Pressure * (PSI) | Working Pressure (PSI) 25% of Burst | Theoretical Yield Point ** (PSI) | Collapse Pressure *** (PSI) |
---|---|---|---|---|---|---|---|
0.250 | 0.020 | 30,000 | 75,000 | 14,286 | 3,571 | 5,714 | 4,416 |
0.250 | 0.028 | 30,000 | 75,000 | 21,649 | 5,412 | 8,660 | 5,967 |
0.250 | 0.035 | 30,000 | 75,000 | 29,167 | 7,292 | 11,667 | 7,224 |
0.250 | 0.049 | 30,000 | 75,000 | 48,355 | 12,089 | 19,342 | 9,455 |
0.250 | 0.065 | 30,000 | 75,000 | 81,250 | 20,313 | 32,500 | 11,544 |
0.375 | 0.020 | 30,000 | 75,000 | 8,955 | 2,239 | 3,582 | 3,029 |
0.375 | 0.028 | 30,000 | 75,000 | 13,166 | 3,292 | 5,266 | 4,145 |
0.375 | 0.035 | 30,000 | 75,000 | 17,213 | 4,303 | 6,885 | 5,077 |
0.375 | 0.049 | 30,000 | 75,000 | 26,534 | 6,634 | 10,614 | 6,816 |
0.375 | 0.065 | 30,000 | 75,000 | 39,796 | 9,949 | 15,918 | 8,597 |
0.500 | 0.020 | 30,000 | 75,000 | 6,522 | 1,630 | 2,609 | 2,316L |
0.500 | 0.028 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
0.500 | 0.035 | 30,000 | 75,000 | 12,209 | 3,052 | 4,884 | 3,906 |
0.500 | 0.049 | 30,000 | 75,000 | 18,284 | 4,571 | 7,313 | 5,316L |
0.500 | 0.065 | 30,000 | 75,000 | 26,351 | 6,588 | 10,541 | 6,786 |
0.500 | 0.083 | 30,000 | 75,000 | 37,275 | 9,319 | 14,910 | 8,307 |
0.625 | 0.020 | 30,000 | 75,000 | 5,128 | 1,282 | 2,051 | 1,859 |
0.625 | 0.028 | 30,000 | 75,000 | 7,381 | 1,845 | 2,953 | 2,568 |
0.625 | 0.035 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
0.625 | 0.049 | 30,000 | 75,000 | 13,947 | 3,487 | 5,579 | 4,335 |
0.625 | 0.065 | 30,000 | 75,000 | 19,697 | 4,924 | 7,879 | 5,591 |
0.625 | 0.083 | 30,000 | 75,000 | 27,124 | 6,781 | 10,850 | 6,910 |
0.625 | 0.095 | 30,000 | 75,000 | 32,759 | 8,190 | 13,103 | 7,734 |
0.625 | 0.109 | 30,000 | 75,000 | 40,172 | 10,043 | 16,069 | 8,639 |
0.750 | 0.028 | 30,000 | 75,000 | 6,052 | 1,513 | 2,421 | 2,156 |
0.750 | 0.035 | 30,000 | 75,000 | 7,721 | 1,930 | 3,088 | 2,669 |
0.750 | 0.049 | 30,000 | 75,000 | 11,273 | 2,818 | 4,509 | 3,664 |
0.750 | 0.065 | 30,000 | 75,000 | 15,726 | 3,931 | 6,290 | 4,749 |
0.750 | 0.083 | 30,000 | 75,000 | 21,318 | 5,330 | 8,527 | 5,905 |
0.750 | 0.095 | 30,000 | 75,000 | 25,446 | 6,362 | 10,179 | 6,637 |
0.750 | 0.109 | 30,000 | 75,000 | 30,733 | 7,683 | 12,293 | 7,453 |
0.750 | 0.120 | 30,000 | 75,000 | 35,294 | 8,824 | 14,118 | 8,064 |
0.875 | 0.020 | 30,000 | 75,000 | 3,593 | 898 | 1,437 | 1,340 |
0.875 | 0.028 | 30,000 | 75,000 | 5,128 | 1,282 | 2,051 | 1,859 |
0.875 | 0.035 | 30,000 | 75,000 | 6,522 | 1,630 | 2,609 | 2,316L |
0.875 | 0.049 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
0.875 | 0.065 | 30,000 | 75,000 | 13,087 | 3,272 | 5,235 | 4,126 |
0.875 | 0.083 | 30,000 | 75,000 | 17,560 | 4,390 | 7,024 | 5,152 |
0.875 | 0.095 | 30,000 | 75,000 | 20,803 | 5,201 | 8,321 | 5,807 |
0.875 | 0.109 | 30,000 | 75,000 | 24,886 | 6,221 | 9,954 | 6,543 |
0.875 | 0.120 | 30,000 | 75,000 | 28,346 | 7,087 | 11,339 | 7,100 |
1.000 | 0.028 | 30,000 | 75,000 | 4,449 | 1,112 | 1,780 | 1,633 |
1.000 | 0.035 | 30,000 | 75,000 | 5,645 | 1,411 | 2,258 | 2,027 |
1.000 | 0.049 | 30,000 | 75,000 | 8,149 | 2,037 | 3,259 | 2,796 |
1.000 | 0.065 | 30,000 | 75,000 | 11,207 | 2,802 | 4,483 | 3,647 |
1.000 | 0.083 | 30,000 | 75,000 | 14,928 | 3,732 | 5,971 | 4,567 |
1.000 | 0.095 | 30,000 | 75,000 | 17,593 | 4,398 | 7,037 | 5,159 |
1.000 | 0.109 | 30,000 | 75,000 | 20,908 | 5,227 | 8,363 | 5,827 |
1.000 | 0.120 | 30,000 | 75,000 | 23,684 | 5,921 | 9,474 | 6,336 |
1.000 | 0.134 | 30,000 | 75,000 | 27,459 | 6,865 | 10,984 | 6,963 |
1.250 | 0.035 | 30,000 | 75,000 | 4,449 | 1,112 | 1,780 | 1,633 |
1.250 | 0.049 | 30,000 | 75,000 | 6,380 | 1,595 | 2,552 | 2,260 |
1.250 | 0.065 | 30,000 | 75,000 | 8,705 | 2,176 | 3,482 | 2,958 |
1.250 | 0.083 | 30,000 | 75,000 | 11,485 | 2,871 | 4,594 | 3,719 |
1.250 | 0.095 | 30,000 | 75,000 | 13,443 | 3,361 | 5,377 | 4,213 |
1.250 | 0.109 | 30,000 | 75,000 | 15,843 | 3,961 | 6,337 | 4,776 |
1.250 | 0.120 | 30,000 | 75,000 | 17,822 | 4,455 | 7,129 | 5,207 |
1.250 | 0.134 | 30,000 | 75,000 | 20,468 | 5,117 | 8,187 | 5,742 |
1.500 | 0.035 | 30,000 | 75,000 | 3,671 | 918 | 1,469 | 1,367 |
1.500 | 0.049 | 30,000 | 75,000 | 5,243 | 1,311 | 2,097 | 1,896 |
1.500 | 0.065 | 30,000 | 75,000 | 7,117 | 1,779 | 2,847 | 2,487 |
1.500 | 0.083 | 30,000 | 75,000 | 9,333 | 2,333 | 3,733 | 3,136 |
1.500 | 0.095 | 30,000 | 75,000 | 10,878 | 2,719 | 4,351 | 3,559 |
1.500 | 0.109 | 30,000 | 75,000 | 12,754 | 3,188 | 5,101 | 4,043 |
1.500 | 0.120 | 30,000 | 75,000 | 14,286 | 3,571 | 5,714 | 4,416 |
1.500 | 0.134 | 30,000 | 75,000 | 16,315 | 4,079 | 6,526 | 4,881 |
1.500 | 0.148 | 30,000 | 75,000 | 18,439 | 4,610 | 7,375 | 5,336 |
1.750 | 0.035 | 30,000 | 75,000 | 3,125 | 781 | 1,250 | 1,176 |
1.750 | 0.049 | 30,000 | 75,000 | 3,864 | 966 | 1,546 | 1,434 |
1.750 | 0.065 | 30,000 | 75,000 | 6,019 | 1,505 | 2,407 | 2,146 |
1.750 | 0.083 | 30,000 | 75,000 | 7,860 | 1,965 | 3,144 | 2,711 |
1.750 | 0.095 | 30,000 | 75,000 | 9,135 | 2,284 | 3,654 | 3,080 |
1.750 | 0.109 | 30,000 | 75,000 | 10,672 | 2,668 | 4,269 | 3,504 |
1.750 | 0.120 | 30,000 | 75,000 | 11,921 | 2,980 | 4,768 | 3,832 |
1.750 | 0.134 | 30,000 | 75,000 | 13,563 | 3,391 | 5,425 | 4,242 |
1.750 | 0.148 | 30,000 | 75,000 | 15,268 | 3,817 | 6,107 | 4,645 |
1.750 | 0.165 | 30,000 | 75,000 | 17,430 | 4,357 | 6,972 | 5,124 |
2.000 | 0.035 | 30,000 | 75,000 | 2,720 | 680 | 1,088 | 1,032 |
2.000 | 0.049 | 30,000 | 75,000 | 3,864 | 966 | 1,546 | 1,434 |
2.000 | 0.065 | 30,000 | 75,000 | 5,214 | 1,303 | 2,086 | 1,887 |
2.000 | 0.083 | 30,000 | 75,000 | 6,788 | 1,697 | 2,715 | 2,387 |
2.000 | 0.095 | 30,000 | 75,000 | 7,873 | 1,968 | 3,149 | 2,715 |
2.000 | 0.109 | 30,000 | 75,000 | 9,175 | 2,294 | 3,670 | 3,092 |
2.000 | 0.120 | 30,000 | 75,000 | 10,227 | 2,557 | 4,091 | 3,384 |
2.000 | 0.134 | 30,000 | 75,000 | 11,605 | 2,901 | 4,642 | 3,751 |
2.000 | 0.148 | 30,000 | 75,000 | 13,028 | 3,257 | 5,211 | 4,111 |
2.000 | 0.165 | 30,000 | 75,000 | 14,820 | 3,705 | 5,928 | 4,542 |
NPS | ASTM A312 OD Tolerance | |||
+ | – | |||
inch | mm | inch | mm | |
1/8~1 1 /2 | 1/64(0.015) | 0.4 | 1/32(0.031) | 0.8 |
> 1 1 /2~4 | 1/32(0.031) | 0.8 | 1/32(0.031) | 0.8 |
> 4~8 | 1/16(0.062) | 1.6 | 1/32(0.031) | 0.8 |
> 8~18 | 3/32(0.093) | 2.4 | 1/32(0.031) | 0.8 |
> 18~26 | 1/8(0.125) | 3.2 | 1/32(0.031) | 0.8 |
> 26~34 | 5/32(0.156) | 4 | 1/32(0.031) | 0.8 |
> 34~48 | 3/16(0.187) | 4.8 | 1/32(0.031) | 0.8 |
NPS | ASTM A312 WT Tolerance, % | |
+ | – | |
1/8-2 1 /2 | 20 | 12.5 |
3~18, t/D≤ 5% | 22.5 | 12.5 |
3~18, t/D> 5% | 15 | 12.5 |
≥ 20, welded | 17.5 | 12.5 |
≥ 20, seamless, t/D≤ 5% | 22.5 | 12.5 |
≥ 20, seamless, t/D> 5% | 15 | 12.5 |
ASTM A312 304/304L | Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding |
ASTM A358 304/304L | Electric fusion welded austenitic pipe for corrosive and/or high temperature service. Typically only pipe up to 8 inch is produced to this specification. Addition of filler metal is permitted during welding |
ASTM A790 304/304L | Seamless and straight-seam welded ferritic/austenitic (duplex) pipe intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking |
ASTM A409 304/304L | Straight-seam or spiral-seam electric fusion welded large diameter austenitic light-wall pipe in sizes 14” to 30” with walls Sch5S and Sch 10S for corrosive and/or high |
ASTM A376 304/304L | Seamless austenitic pipe for high temperature applications |
ASTM A813 304/304L | Single-seam, single- or double- welded austenitic pipe for high temperature and general corrosive applications |
ASTM A814 304/304L | Cold-worked welded austenitic pipe for high temperature and general corrosive service |
Custom Size 4 Inch SS 304 Stainless Steel Welded Pipe | Belgium, Indonesia, Philippines, Dammam -KSA |
20mm diameter stainless steel pipe 304 | Thailand, France, Europe, Qatar |
aisi 304 mirror polished seamless stainless steel pipe | Malaysia, Germany, Thailand, Czechia |
304 2b surface seamless or welded stainless steel pipe | Finland, USA, Bangladesh, Malaysia |
Food Grade 304 Sanitary Seamless Stainless Steel Tube | Brazil, Saudi Arabia (KSA), Kuwait, South Africa |
304 stainless tubing | Singapore, South Africa, Singapore, Bahrain |
Decorative 304 grade 6 inch welded polished stainless steel pipe | Nigeria, Australia, UK, Philippines |
304 stainless steel pipe square tube | UAE, Malaysia, Hong Kong, Oman |
3 In. Schedule 40 304 Stainless Steel Pipe | Singapore, Italy, Iran, Chile |
304 stainless steel Exhaust Pipe | Malaysia, Turkey, Norway, United Arab Emirates (UAE) |
Dia 1.0mm thick 0.2mm 304 grade BA stainless steel capillary tube | Dubai, Malaysia, Russia, Netherlands |
2.5 304 stainless steel tubing | UK, Spain, Mexico, Egypt |
304 12mm Diameter Stainless Steel Pipe Tube | UAE, Europe, Malaysia, United Kingdom -UK |
ss 304 schedule 10 pipe | Ellington -United States, Canada, Poland, UK |
3 X 0.083 In. Weld 304 Stainless Steel Tubing | Singapore, Malaysia, Canada, Philippines |
ASTM A312 TP304 Seamless Pipe | Malaysia, Japan, Romania, Europe |
10mm 304 stainless steel round tube | China, Colombia, Malaysia, Sweden |
304 cold rolled stainless steel square pipe | Philippines, Taiwan, Los Alamos -Mexico, Malaysia |