Stainless Steel 304L Sheet

ASTM A240/ SA240 TP304L Plate Supplier, Check Pressure Rating of UNS S30403 Coil

Stainless steel is graded in series. These classify the different types of stainless steel from 200-600. Stainless Steel 304L Sheet is the lower carbon version of the 304 steel alloy. The addition of molybdenum in this sheet provides it high resistance from corrosion and erosion. The 304l Stainless Steel Strip also possesses good tensile, yield strength and doesn’t deform easily under extreme temperatures. They are widely used in the food, paper, chemical, textile, and petroleum industries. We are the leading manufacturer and supplier of Stainless Steel 304L Sheet in the country. We thrive to produce the products, which are available at reasonable rates.

Get a Best Quote for SA 240 Type 304L Foil. Stockist of 304l Stainless Steel Strip/ Foil.

A UNS S30403 Coil is a steel product, which is wound or coiled after rolling. This material can be produced either by hot rolling or cold rolling this material. The 304L Stainless Steel Hot Rolled Sheet is produced by roll pressing it at high temperatures at over 1,700˚F. This high temperature makes the formation of the steel easier. These sheets are made inside hot strip mills. Our ASTM A240 TP304L Plate and other products are produced using the latest technology and the best raw materials following national and international standards.

SA 240 Type 304L Foil is a non-magnetic tape, which allows tools and other materials to be wrapped. This helps protect this material during heat treatment. These foils are available in sizes from 0.005 to 0.20 with a maximum width of 60. All our products can be customized into different shapes and sizes to suit your requirements. If you have any questions regarding our stainless sheets or any other products, contact us for more information.

Specification of Stainless Steel 304L Sheet

Specification ASTM A240 / ASME SA240
Finish Cold rolled sheet (CR), Hot rolled plate (HR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Condition Polished on both sides
Thickness 0.1mm to 100 mm Thk
Hardness Hard, Half Hard, Soft, Spring Hard, Quarter Hard etc.
Temper Annealed
Stock in form of Plate, Sheet, Coils, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, hot rolled, cold rolled, annealed, Flat Sheet, Rolling Plate, tread plate, Foils, Rolls, Blank (Circle), soft annealed, descaled, Plain Sheet, Flat Shim, sheared, Checker Plate
Value Added Service Pickling, Cladding, Heat Treatment, Annealed,Cutting, Bending, Forging, Minor Fabrication, Polish, Rolling Etc.
Width 10-2500mm
Profiling

To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
  • Laser Plate Cutting
Dealers & Distributor of JINDAL, TATA, POSCO, JISCO, TISCO, BHUSHAN, SAIL, ESSAR, INDIAN, LISCO, BAOSTEEL IMPORTED material
Test Report
  • EN 10204/3.1B
  • Third Party Inspection Report, etc
  • 100% Radiography Test Report
  • Strict Control from Raw Material to Finished
  • High special strength, high melt point
  • Customer support after-sales service
  • Raw Materials Certificate
  • Excellent corrosive resistance, good thermal resistance
Export to Brazil, Singapore, Indonesia, Canada, India, Ukraine, Thailand, Egypt, Ireland, Saudi Arabia, Oman, Dubai, Korea, Iran, Spain, USA, Peru, etc
Specialized in
  • material under 3/16 " [5.00 mm] in thickness and 24" [600 mm] and over in width
  • cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • Free Quote, Inquiry answered within 24 hours
Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available

Ss 304l Sheet Price In India

Price list of Stainless Steel 304L Plate Ss 304l Sheet / Plate Price in INR Ss 304l Sheet / Plate Price in USD Ss 304l Sheet / Plate Price in UAE Dirham

S S C R SHEETS GRADE 304L(THICKNESS 1.00 MM X WIDTH 1000 MM X LENGTH 2000 MM)

INR 133 1.75 USD 6.44 UAE Dirham

ASTM A240 TP304L Plate Dimensions Chart

Metric Dimensions

Surface finish Thickness (mm) Width (mm)
2B – Cold rolled, heat treated, pickled, skin passed 0.25–8.0 max. 2032
2D – Cold rolled, heat treated, pickled 0.4–6.35 max. 1524
2E – Cold rolled, heat treated, mechanically descaled 0.4–8.0 max. 2032
2R – Cold rolled, bright annealed 0.25–3.5 max. 1524
2H – Work hardened 0.4–6.35 max. 1524
Polished, brushed 0.5–4.0 max. 1524

Imperial Dimensions

Surface finish Gauge (in) Width (in)
2B – Cold rolled, heat treated, pickled, skin passed 10–24 max. 72*
2D – Cold rolled, heat treated, pickled 12–24 max. 60
BA Mexinox only 18–28 max. 48
Polished (not brushed) 11–24 max. 60
Temper rolled Mexinox only 13–29 max. 48

Superior pitting and crevice corrosion resistance 304L Stainless Steel Hot Rolled Sheet, Own stockyard of AISI 304L Strips

Weight Chart of Hot Rolled SS 304 Sheet

Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

304l Stainless Steel Sheet Thickness

Thickness
in. (mm)
Sheet Width
36 (914.4)
in. (mm
48 (1,219)
in. (mm)
0.017–0.030 (0.43–0.76) 0.0015 (0.038) 0.002 (0.051)
0.031–0.041 (0.79–1.04) 0.002 (0.051) 0.003 (0.076)
0.042–0.059 (1.1–1.5) 0.003 (0.076) 0.004 (0.10)
0.060–0.073 (1.5–1.9) 0.003 (0.076) 0.0045 (0.11)
0.074–0.084 (1.9–2.1) 0.004 (0.10) 0.0055 (0.14)
0.085–0.099 (2.2–2.5) 0.004 (0.10) 0.006 (0.15)
0.100–0.115 (2.5–2.9) 0.005 (0.13) 0.007 (0.18)
0.116–0.131 (2.9–3.3) 0.005 (0.13) 0.0075 (0.19)
0.132–0.146 (3.4–3.7) 0.006 (0.15) 0.009 (0.23)
0.147–0.187 (3.7–4.7) 0.007 (0.18) 0.0105 (0.2

SA 240 Type 304L sheet Size Chart

SIZE SIZE
.125" 3.18mm
.134" 3.40mm
.156" 3.96mm
.187" 4.75mm
.250" 6.35mm
.312" 7.92mm
.375" 9.53mm
.500" 12.7mm
.625" 15.9mm
.750" 19.1mm
.875" 22.2mm
1" 25.4mm
1.125" 28.6mm
1.250" 31.8mm
1.500" 38.1mm
1.750" 44.5mm
2" 50.8mm
2.500" 63.5mm
3" 76.2mm
Buy Certified & Tested UNS S30403 2d stainless steel cold rolled coil, Global Dealer of WNR 1.4307 Chequered Plate.

Different Types of SS UNS S30400 Plates / Sheet

SA 240 Type 304L Cold Rolled Plate Chemical Element

Grade C Mn Si P S Cr Mo Ni N
SS 304L 0.035 max 2.0 max 1.0 max 0.045 max 0.03 max 18 – 20 8 – 13

Mechanical Characteristics of 304l Stainless Steel Foil

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304L 485 170 40 92 201
Get in touch for assistance before buying ASME SA240 Stainless Steel 304L Shim Stock, Check Price List of Werkstoff No 1.4306 Perforated Sheet

Equivalent Material of WNR 1.4307 Chequered Plate

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304L S30403 304S11 58E 1.4301 X5CrNi18-10 2332 SUS 304L

We Stock In India And Supply In Below Countries

304L thin 0.4 mm 0.3mm thickness stainless steel sheet Chile, Iran, Canada, Philippines
hot rolled mirror and matte 304l stainless steel plate United Arab Emirates (UAE), Norway, Romania, Europe
304l Cold Rolled Stainless Steel Plate Netherlands, Russia, Malaysia, Sweden
AISI 304l 2b finish stainless steel sheet Egypt, Mexico, Los Alamos -Mexico, Malaysia
Food Grade 2mm 304l Stainless Steel Plate 1500 x 6000mm United Kingdom -UK, Malaysia, NY 12203 (USA), Singapore
0.35mm Cold Rolled BA Mirror 304L stainless steel coil UK, Poland, Philippines, Dammam -KSA
304L Stainless Steel Checkered Plate Embossed 4*8 FT Singapore, Malaysia, Europe, Qatar
No.4 brushed HL 304L stainless steel sheet /plate Malaysia, Japan, Thailand, Czechia
6mm thick 304L stainless steel sheet China, Colombia, Bangladesh, Malaysia
food grade 1mm SS 304l plate Philippines, Taiwan, Kuwait, South Africa
2 mm Thickness Stainless Steel Sheet Belgium, Indonesia, UK, Philippines
ASTM A240 304L 1.2mm hairline/satin/brush finish stainless steel plate Thailand, France, Hong Kong, Oman
304L Stainless Steel Coil 2B Finish Malaysia, Germany, Turkey, Malaysia
304L NO.3 HL #4 16 gauge 4ft x 6ft 4ft x 8ft 2mm sheet and plate Finland, USA, Malaysia, Dubai
2mm thickness 304L 06cr19ni10 stainless steel coil/strip Brazil, Saudi Arabia (KSA), Spain, UK
304L precision stainless steel divider strip Singapore, South Africa, Europe, UAE
14h hard stainless steel strip type 304L Nigeria, Australia, Canada, Ellington -United States
astm 304L 2B surface 0.5mm thick Stainless Steel Strip UAE, Malaysia, Italy, Singapore