Steel is measured by its grade based on its thickness, physical properties, and oxidation state. Stainless steel 310 sheet is a austenitic medium carbon alloy. They are widely used in various industries due to their high chromium and nickel content. This composition makes it extremely resistant to corrosion and erosion. These sheets can be used in high-temperature applications up to 1150°C. The ASTM A240 Type 310s Plate is a lower carbon version of the 310 sheets. The 310 and 310s alloys are widely used in petroleum refineries, burners, tube hangers, food-processing equipment, steam boilers, etc. We are one of the top Stainless steel 310 sheet manufactures in India who focus on creating high-quality products at the most reasonable prices.
Most sheets and plates are produced by the hot-rolling or cold-rolling process. The AISI 310 Hot Rolled Plates are produced by rolling the steel at a high temperature of about 1700° F. This is above the recrystallization property of most steel. This enables the steel to be shaped properly. This process is cheaper as compared to cold-rolling of steel. Like the 310 sheets, the low carbon ASME SA240 Grade 310S Strip can be customized to different sizes to suit all your requirements.
Stainless steel is produced in slabs, which are later converted from Z mill into coils. The 310 Stainless Steel Coil can be defined into different names based on their appearance and processing. These coils are in high demand in the manufacturing and construction industries. The high-quality raw materials used in the preparation of these UNS S31000 Strip by our renowned workers allow them to withstand higher static stresses. If you have any queries regarding the Stainless steel 310 sheet or our other products, please contact us for more information.
Specification | ASTM A240 / ASME SA240 |
---|---|
Finish | Cold rolled sheet (CR), Hot rolled plate (HR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Condition | Polished on both sides |
Thickness | 0.1mm to 100 mm Thk |
Hardness | Hard, Half Hard, Soft, Spring Hard, Quarter Hard etc. |
Temper | Annealed |
Stock in form of | Plate, Sheet, Coils, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, hot rolled, cold rolled, annealed, Flat Sheet, Rolling Plate, tread plate, Foils, Rolls, Blank (Circle), soft annealed, descaled, Plain Sheet, Flat Shim, sheared, Checker Plate |
Value Added Service | Pickling, Cladding, Heat Treatment, Annealed,Cutting, Bending, Forging, Minor Fabrication, Polish, Rolling Etc. |
Width | 10-2500mm |
Profiling |
To provide a full profiling service we use numerous profiling methods including:
|
Dealers & Distributor of | JINDAL, TATA, POSCO, JISCO, TISCO, BHUSHAN, SAIL, ESSAR, INDIAN, LISCO, BAOSTEEL IMPORTED material |
Test Report |
|
Export to | Brazil, Singapore, Indonesia, Canada, India, Ukraine, Thailand, Egypt, Ireland, Saudi Arabia, Oman, Dubai, Korea, Iran, Spain, USA, Peru, etc |
Specialized in |
|
Length & Sizes | 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available |
Price list of SS 310 Plate | SS 310 Plate Price in INR | SS 310 Plate Price in USD | SS 310 Plate Price in UAE Dirham |
---|---|---|---|
S S C R SHEETS GRADE 310(THICKNESS 2.00 MM X WIDTH 1500 MM X LENGTH3000 MM) | INR 131 | 1.73 USD | 6.34 UAE Dirham |
Metric Dimensions
Surface finish | Thickness (mm) | Width (mm) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed | 0.25–8.0 | max. 2032 |
2D – Cold rolled, heat treated, pickled | 0.4–6.35 | max. 1524 |
2E – Cold rolled, heat treated, mechanically descaled | 0.4–8.0 | max. 2032 |
2R – Cold rolled, bright annealed | 0.25–3.5 | max. 1524 |
2H – Work hardened | 0.4–6.35 | max. 1524 |
Polished, brushed | 0.5–4.0 | max. 1524 |
Imperial Dimensions
Surface finish | Gauge (in) | Width (in) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed | 10–24 | max. 72* |
2D – Cold rolled, heat treated, pickled | 12–24 | max. 60 |
BA Mexinox only | 18–28 | max. 48 |
Polished (not brushed) | 11–24 | max. 60 |
Temper rolled Mexinox only | 13–29 | max. 48 |
Thickness | Plate Weight per Unit Area | Density |
---|---|---|
3/16 inches | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/4 inches | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/8 inches | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/2 inches | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
5/8 inches | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/4 inches | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
7/8 inches | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 inches | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/4 inches | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/2 inches | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 3/4 inches | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 inches | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/4 inches | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/2 inches | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 3/4 inches | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3 inches | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
SIZE | SIZE |
---|---|
.125" | 3.18mm |
.134" | 3.40mm |
.156" | 3.96mm |
.187" | 4.75mm |
.250" | 6.35mm |
.312" | 7.92mm |
.375" | 9.53mm |
.500" | 12.7mm |
.625" | 15.9mm |
.750" | 19.1mm |
.875" | 22.2mm |
1" | 25.4mm |
1.125" | 28.6mm |
1.250" | 31.8mm |
1.500" | 38.1mm |
1.750" | 44.5mm |
2" | 50.8mm |
2.500" | 63.5mm |
3" | 76.2mm |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
---|---|---|---|---|---|---|---|---|---|
SS 310 | 0.015 max | 2.0 max | 0.15 max | 0.020 max | 0.015 max | 24.00 - 26.00 | 0.10 max | 19.00 - 21.00 | 54.7 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|---|---|
7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
---|---|---|---|---|---|---|---|
SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | - | X15CrNi25-20 |
ASTM A240 Grade 310S Plate Mirror Finish | Dammam -KSA, Indonesia, Philippines, Belgium |
UNS s31008 stainless steel plate | Qatar, France, Europe, Thailand |
Decorative hairline inox 310 cold rolled stainless steel sheet | Czechia, Germany, Thailand, Malaysia |
310 SS #8 Finish Sheet Coil | Malaysia, USA, Bangladesh, Finland |
Stainless Steel AISI 310 Hairline Sheet | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |
Cold rolled 310 Stainless Steel Sheet | Bahrain, South Africa, Singapore, Singapore |
Type inox 5mm thickness stainless steel sheet 310S | Philippines, France, Australia, UK, Nigeria |
Cold Rolled No.1 Finish 310 Stainless Steel Sheet | Oman, Malaysia, Hong Kong, UAE |
A240 Type 310 Perforated Sheet | Chile, Italy, Iran, Singapore |
Grade 310 Stainless Steel Checkered Plate | United Arab Emirates (UAE), Turkey, Norway, Malaysia |
ASTM 310 Stainless Steel Corrugated Sheet for Roofing | Netherlands, Malaysia, Russia, Dubai |
Hairline Mirrror Polished 310 Stainless Steel Sheet | Egypt, Spain, Mexico, UK |
Hot rolled ASTM A240 TP 310 extra thick plate | United Kingdom -UK, Europe, Malaysia, UAE |
Stainless Steel AISI 310 Plate Brushed Finish | UK, Canada, Poland, Ellington -United States |
No.4 hairline 310 mirror black stainless steel sheet | Philippines, Malaysia, Canada, Singapore |
12mm thickness 310 etched embossed stainless steel decorative sheets | Europe, Japan, Romania, Malaysia |
X15CrNi25-21 stainless steel sheet 310 plate cold rolled | Sweden, Colombia, Malaysia, China |
25 MM THICKNESS x WIDTH 1000 / 2500 MM X LENGTH 1000 MM / CUT TO SIZE in ASTM A240 AISI 310 Stainless Sheet | Malaysia, Taiwan, Los Alamos -Mexico, Philippines |
310 Super Mirror finish 3mm stainless steel sheet | Singapore, South Korea, NY 12203 (USA), Malaysia |