Nearly all manufacturers use standard ASME B16.11 to produce pipe fittings. This standard enables manufacturers in the production of ASME B16.11 Fittings. The ratings, tolerance, dimensions, and raw material requirements gained from the standards help in creating the best products. The ASME B16.11 Material which is used to make forged steel fittings, is used in connecting equipment with pipes and other ASME B16.11 series. The ASME B16.11 Reducing Tee is another fitting of the ASME B16.11 series. This reducing tee has 3 female openings like any other tee. In the reducing tee, however, one of the openings is smaller than the remaining 2. These are commonly used in vacuum piping systems. We are the biggest manufactures of ASME B16.11 Fittings in the country. Our main aim is to provide the best quality products at reasonable rates.
The ANSI B16 11 Threaded Elbow is installed between pipes to change its direction of flow. Threaded elbows represent the oldest method of joining 2 pipes. These are mainly used to join small pipes. These low–cost Ansi B16 11 Fittings are used in domestic water supply, fire protection, and industrial systems. We use the best raw materials to produce the best pipe fittings. The ANSI B16 11 Half Coupling is used in the process of boring a small vessel to a large bore type. The coupling is of two types male and female. In the male coupling, the external threads fit over it while in the female the threads are internal. The piping in the coupling is twisted to secure the connection. These are widely used in aerospace for pressurized fuel piping.
Specification : | ASME B16.11 |
Dimensions Class: | 3000#, 6000#, 2000#, 9000# |
Pressure: | Check Pressure Rating Of Socket, Threaded: 6000 LBS, 3000 LBS, 9000 LBS |
Export to | Singapore, Indonesia, Dubai, Brazil, Ukraine, India, Thailand, Korea, Oman, Spain, Canada, USA, Ireland, Iran, Egypt, Saudi Arabia, Peru, etc |
---|---|
Size Chart Of: | 1/8” NB to 4” NB (Screwed-Socket) |
Forged Type : | BSPT, NPT (Threaded), BSPP. |
Mills And Origin : | Russian, USA, Europe, India, Japanese |
Connection Type : | Welding |
ASME B16.11 Fittings Price in India | ANSI B16 11 Threaded Fittings Price in INR | ASME B16.11 Fittings Price in USD | Ansi B16 11 Fittings Price in UAE Dirham |
SOCKETWELD FITTING,EQUAL TEE ASIM A182 F304L,1.1/2,3000LBSANSI/ASME B16.11 | Rs. 2,767 | 36.93 USD | UAE Dirham 135.64 |
ASIM A182 F304L,ELBOW 90 DEGREE,1.1/2,3000LBS ANSI/ASME B16.11 | Rs. 3,306 | 44.12 USD | UAE Dirham 162.06 |
DN | NPS | Center to End NPT Elbow, NPT Tee, NPT Cross A |
Center to End 45 Deg Elbow C |
O.D. of Band H |
Min. Wall Thick. G |
Length of Thread. Minimum (1) |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | B | L2 | ||
6 | 1/8 | 21 | 21 | 25 | 17 | 17 | 19 | 22 | 22 | 25 | 3.18 | 3.18 | 6.35 | 6.4 | 6.7 |
8 | 1/4 | 21 | 25 | 28 | 17 | 19 | 22 | 22 | 25 | 33 | 3.18 | 3.30 | 6.60 | 8.1 | 10.2 |
10 | 3/8 | 25 | 28 | 33 | 19 | 22 | 25 | 25 | 33 | 38 | 3.18 | 3.51 | 6.98 | 9.1 | 10.4 |
15 | 1/2 | 28 | 33 | 38 | 22 | 25 | 28 | 33 | 38 | 46 | 3.18 | 4.09 | 8.15 | 10.9 | 13.6 |
20 | 3/4 | 33 | 38 | 44 | 25 | 28 | 33 | 38 | 46 | 56 | 3.18 | 4.32 | 8.53 | 12.7 | 13.9 |
25 | 1 | 38 | 44 | 51 | 28 | 33 | 35 | 46 | 56 | 62 | 3.68 | 4.98 | 9.93 | 14.7 | 17.3 |
32 | 1-1/4 | 44 | 51 | 60 | 33 | 35 | 43 | 56 | 62 | 75 | 3.89 | 5.28 | 10.59 | 17.0 | 18.0 |
40 | 1-1/2 | 51 | 60 | 64 | 35 | 43 | 44 | 62 | 75 | 84 | 4.01 | 5.56 | 11.07 | 17.8 | 18.4 |
50 | 2 | 60 | 64 | 83 | 43 | 44 | 52 | 75 | 86 | 102 | 4.27 | 7.14 | 12.09 | 19.0 | 19.2 |
65 | 2-1/2 | 76 | 83 | 95 | 52 | 52 | 64 | 92 | 102 | 121 | 5.61 | 7.65 | 15.29 | 23.6 | 28.9 |
85 | 3 | 86 | 95 | 106 | 64 | 64 | 79 | 109 | 121 | 146 | 5.99 | 8.84 | 16.64 | 25.9 | 30.5 |
100 | 4 | 106 | 114 | 114 | 79 | 79 | 79 | 146 | 152 | 152 | 6.55 | 11.18 | 18.67 | 27.7 | 33.0 |
ASME B16.11 Pressure-Temperature | |||||
---|---|---|---|---|---|
Temperature | Class | ||||
150 | 300 | ||||
1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Normal Pipe Size | A | B | QTY | Weight In KG |
---|---|---|---|---|
¼ | 0.81 | 0.88 | 160 | 0.20 |
⁄ | 0.97 | 1.00 | 130 | 0.26 |
½ | 1.12 | 1.31 | 100 | 0.57 |
¾ | 1.31 | 1.5 | 75 | 0.71 |
1 | 1.5 | 1.81 | 40 | 1.08 |
1 ¼ | 1.75 | 2.19 | 25 | 1.68 |
1 ½ | 2.00 | 2.44 | 18 | 2.38 |
2 | 2.38 | 2.97 | 10 | 3.55 |
2 ½ | 3.00 | 3.62 | 4 | 6.22 |
3 | 3.38 | 4.31 | 2 | 10.36 |
4 | 4.19 | 5.75 | 1 | 23.91 |
Normal Pipe Sizes | Min. Length of Thread |
O.D> of Band D |
Center to End A |
Min. Wall Thick. |
|
B | J | ||||
1/2 | 10.9 | 13.6 | 33 | 28 | 3.18 |
3/4 | 12.7 | 13.9 | 38 | 33 | 3.18 |
1 | 14.7 | 17.3 | 46 | 38 | 3.68 |
1 ¼ | 17 | 18 | 56 | 44 | 3.89 |
1 ½ | 17.8 | 18.4 | 62 | 51 | 4.01 |
2 | 19 | 19.2 | 75 | 60 | 4.27 |
2 ½ | 23.6 | 28.9 | 92 | 76 | 5.61 |
3 | 25.9 | 30.5 | 109 | 86 | 5.99 |
4 | 27.7 | 33 | 146 | 106 | 6.55 |
Thread Of NPT Size And Pitch |
Dash Size |
Thread Male Minor Outside Daimeter |
Female ID Thread |
||
inches – TPI | millimeter | inches | millimeter | inches | |
1/8 – 27 | -02 | 9,9 | 0.39 | 8,4 | 0.33 |
1/4 – 18 | -04 | 13,2 | 0.52 | 11,2 | 0.44 |
3/8 – 18 | -06 | 16,6 | 0.65 | 14,7 | 0.58 |
1/2 – 14 | -08 | 20,6 | 0.81 | 17,8 | 0.70 |
3/4 – 14 | -12 | 26,0 | 1.02 | 23,4 | 0.92 |
1 – 11.1/2 | -16 | 32,5 | 1.28 | 29,5 | 1.16 |
1.1/4 – 11.1/2 | -20 | 41,2 | 1.62 | 38,1 | 1.50 |
1.1/2 – 11.1/2 | -24 | 47,3 | 1.86 | 43,9 | 1.73 |
2 – 11.1/2 | -32 | 59,3 | 2.33 | 56,4 | 2.22 |
2.1/2 – 8 | -40 | 71,5 | 2.82 | 69,1 | 2.72 |
3 – 8 | -48 | 87,3 | 3.44 | 84,8 | 3.34 |
Bspp And Bspt Pitch And Size |
Dash Size |
Bspt Male Thread Outside Daimeter |
Bspp Male THREAD Outside Daimeter |
Bspt Female Thread Inside Daimeter |
Bspt Female Thread Inside Daimeter |
||||
inches – TPI | millimeter | inches | millimeter | inches | millimeter | inches | millimeter | inches | |
1/8 – 28 | -02 | 9,5 | 0.37 | 9,6 | 0.38 | 8,4 | 0.33 | 8,6 | 0.34 |
1/4 – 19 | -04 | 12,8 | 0.50 | 13,0 | 0.51 | 11,2 | 0.44 | 11,9 | 0.47 |
3/8 – 19 | -06 | 16,3 | 0.64 | 16,5 | 0.65 | 14,7 | 0.59 | 15,2 | 0.60 |
1/2 – 14 | -08 | 20,4 | 0.80 | 20,8 | 0.82 | 18,3 | 0.72 | 19,1 | 0.75 |
5/8 – 14 | -10 | 22,5 | 0.89 | 22,8 | 0.90 | 20,6 | 0.81 | 20,8 | 0.82 |
3/4 – 14 | -12 | 25,9 | 1.02 | 26,3 | 1.04 | 23,9 | 0.94 | 24,6 | 0.97 |
1 – 11 | -16 | 32,6 | 1.28 | 33,1 | 1.30 | 29,7 | 1.17 | 30,7 | 1.21 |
1.1/4 – 11 | -20 | 41,1 | 1.62 | 41,8 | 1.64 | 38,6 | 1.52 | 39,4 | 1.55 |
1.1/2 – 11 | -24 | 47,0 | 1.85 | 47,7 | 1.88 | 44,5 | 1.75 | 45,5 | 1.79 |
2 -11 | -32 | 58,6 | 2.31 | 59,5 | 2.34 | 56,4 | 2.22 | 57,4 | 2.26 |
2.1/2 – 11 | -40 | 74,1 | 2.92 | 75,1 | 2.95 | 71,9 | 2.83 | 72,6 | 2.86 |
3 – 11 | -48 | 86,6 | 3.41 | 87,9 | 3.46 | 84,6 | 3.33 | 85,4 | 3.36 |
ANSI B16.11 American Standard Dimensional Tolerances | ||
---|---|---|
"A" - Threaded Center To Bottom | For Size 1/8" And 1/4" | ± 0.03" |
3/8", 1/2" And 3/4" | ± 0.06" | |
1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
2-1/2", 3", And 4" | ± 0.10" | |
"B" - Threaded Bore Diameter | For Size 1-1/2" And Smaller | + 0.020" - 0.000" |
2", 2-1/2", 3" And 4" | + 0.025" - 0.000" | |
"C" - Threaded Wall Thick. | Min. = 1.09 T (But Not Less Than 5/32") T = Wall Thickness Of Nominal Pipe Sizes | |
"D" - Bore Diameter Of Pipe Fitting | For Size 2" And Smaller | ± 0.030" |
2-1/2", 3" And 4" | ± 0.060" | |
"E" - Threadeds- Bottom To Bottom - Full Couplings | For Size 1/8" And 1/4" | ± 0.06" |
3/8", 1/2" And 3/4" | ± 0.12" | |
1", 1-1/4", 1-1/2" And 2" | ± 0.16" | |
2-1/2", 3", And 4" | ± 0.20" | |
"F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half Couplings | For Size 1/8" And 1/4" | ± 0.03" |
3/8", 1/2" And 3/4" | ± 0.06" | |
1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
2-1/2", 3", And 4" | ± 0.10" | |
"G" - Gap Of Welding | Approx. 0.06" Before Welding Recommended Gap | |
"H" - Min. Flat | Min. Flat = 0.75 X Min. Threaded Wall Thick. |
Description | Class Designation | ||
3000# | 6000# | 9000# | |
45 deg and 90 deg elbow Tee, Coupling, Crosse, Half-Coupling, End or NPT Pipe Cap |
1/2 - 4 | 1/2 - 2 | 1/2 - 2 |
1/2 - 4 | 1/2 - 2 | 1/2 - 2 | |
1/2 - 4 | 1/2 - 2 | 1/2 - 2 | |
Pipe Size by Wall Thickness |
SCH 80 / XS | SCH 160 | XXS |
MSS SP-43 | Corrosion Resistant Applications, Fabricated and Wrought Butt-Welding Fittings for Low Pressure |
ASTM A182 – ASME SA182 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
ASME B16.9 | Wrought Buttwelding Fittings |
ASME B16.11 | Socket – Welding and Threaded, Forged Fittings |
MSS SP-95 | Bull Plugs & Swage(d) Nipples |
BS3799 | Specification of screwed and Socket-welding, Steel pipe fittings |
Carbon Steel |
|
Stainless Steel |
|
Alloy Steel |
|
Titanium |
|
Inconel |
|
Copper | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
Copper Nickel | Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
Brass | 3602 / 2604 / H59 / H62 / etc. |
Hastelloy | Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X |
Monel | Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
Alloy 20 | Carpenter® 20 Alloy, Alloy 20Cb-3 |
Aluminium | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
Nickel | Nickel 200 , Nickel 201 |
Duplex | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Super Duplex | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Incoloy | Incoloy 800, Incoloy 800H, Incoloy 800HT (UNS N08800), Incoloy 825 (UNS N08825) |
254 Smo | SMO 254/6Mo, UNS S31254, DIN 1.4547 |
Nimonic | Nimonic 75, Nimonic 80A, Nimonic 90 |
Other material | Tin bronze, Alumunum bronze, Lead bronze |
12 inch npt forged asme b16.11 dn300 elbow | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |
Carbon Steel B16.11 Socket Weld Union | Czechia, Germany, Thailand, Malaysia |
ASME B16.11 Forged Pipe Fittings 3000LB NPT | Dammam -KSA, Indonesia, Philippines, Belgium |
Tee forged ASME B16.11 NPT A105 3000lbs 1/2 inch | Philippines, Malaysia, Canada, Singapore |
ASME B16.11 SW Th elbow | Singapore, South Korea, NY 12203 (USA), Malaysia |
NIPPLE 4" 3000LB ASME B16.11 | Europe, Japan, Romania, Malaysia |
ASME B16.11 2000# High Pressure Socket Weld Tee | Philippines, France, Australia, UK, Nigeria |
ASME B16.11 Hydraulic Pipe Fittings | Netherlands, Malaysia, Russia, Dubai |
6000lb ASME B16.11 Forged Socket Weld Cross | Malaysia, USA, Bangladesh, Finland |
ANSI B16.11 A105 3000LB 90 degree 24" Elbow | Qatar, France, Europe, Thailand |
ASME B16.11 3000lb sch40s Sockolet | Sweden, Colombia, Malaysia, China |
ASME B16.11 Reducing Tee | Egypt, Spain, Mexico, UK |
ASME B16.11 3000#/6000# Stainless Steel Hex Head Thread Bushing | Malaysia, Taiwan, Los Alamos -Mexico, Philippines |
6000# Socket weld pipe fittings ASME B16.11 | Chile, Italy, Iran, Singapore |
union half fitting asme b16.11 forged steel | Oman, Malaysia, Hong Kong, UAE |
ASME B16.11 DN30 stainless steel threaded forged tee | UK, Canada, Poland, Ellington -United States |
hex- bushing asme b16.11 | Bahrain, South Africa, Singapore, Singapore |
F304 ASME B16.11 Stainless Steel Socket Weld Tee | United Arab Emirates (UAE), Turkey, Norway, Malaysia |
2'' 3000# 90D SW Elbow ASME B16.11 | United Kingdom -UK, Europe, Malaysia, UAE |